Alternatives and similar repositories for Nandland-RISC-V

Users that are interested in Nandland-RISC-V are comparing it to the libraries listed below

• MichaelBell / nanoV
  RISC-V RV32E core designed for minimal area
  ☆18Updated 8 months ago
• MichaelBell / tinyQV
  A Risc-V SoC for Tiny Tapeout
  ☆30Updated last week
• mattvenn / wishbone_buttons_leds
  simple wishbone client to read buttons and write leds
  ☆18Updated last year
• splinedrive / kianFpgaPong
  Basic Pong you can extend with rotary, sound, vga generator and autopilot
  ☆11Updated 3 years ago
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆98Updated last year
• smunaut / doom_riscv
  Doom classic port to lightweight RISC‑V
  ☆94Updated 3 years ago
• epsilon537 / boxlambda
  FPGA based microcomputer sandbox for software and RTL experimentation
  ☆63Updated this week
• rob-ng15 / Silice-Playground
  Programs for the FOMU, DE10NANO and ULX3S FPGA boards, written in Silice https://github.com/sylefeb/Silice
  ☆35Updated 2 years ago
• GMM-7550 / gmm7550-hardware
  CologneChip GateMate FPGA Module: GMM-7550
  ☆22Updated last week
• emard / ulx3s-misc
  Miscellaneous ULX3S examples (advanced)
  ☆78Updated last month
• cr1901 / sentinel
  Another size-optimized RISC-V CPU for your consideration.
  ☆58Updated 3 weeks ago
• OLIMEX / GateMateA1-EVB
  Development board for GateMateA1 CCGM1A1 FPGA from Cologne Chip with PS2 VGA 64Mbit RAM RP2040
  ☆30Updated 7 months ago
• machdyne / qqspi
  QQSPI Pmod-compatible 32MB PSRAM module
  ☆15Updated last year
• colognechip / gatemate_ila
  The ILA allows you to perform in-system debugging of your designs on the GateMate FPGA at runtime. All signals of your design inside the …
  ☆52Updated 2 months ago
• smunaut / iCE40linux
  Gateware / Firmware / BuildRoot to run linux on iCE40 / iCEBreaker
  ☆99Updated 2 years ago
• Wren6991 / libfpga
  Reusable Verilog 2005 components for FPGA designs
  ☆45Updated 5 months ago
• efabless / clear
  ☆70Updated 11 months ago
• fredrequin / fpga_1943
  Verilog re-implementation of the famous CAPCOM arcade game
  ☆29Updated 6 years ago
• mattvenn / logLUTs
  Tool to parse yosys and nextpnr logfiles to then plot LUT, flip-flop and maximum frequency stats as your project progresses.
  ☆21Updated last year
• StereoNinja / StereoNinjaFPGA
  Experimental FPGA project for streaming two MIPI CSI camera streams to an HDMI monitor using a ULX3S FPGA board
  ☆30Updated 2 years ago
• qubeck78 / tangyRiscVSOC
  RiscV based SOC with 2D and 3D graphics acceleration for Tang Nano 20K
  ☆37Updated last year
• ulx3s / fpga-odysseus
  FPGA Odysseus with ULX3S
  ☆66Updated last year
• regymm / pcie_7x
  PCIe Endpoint on Xilinx 7-Series FPGAs with the PCIE_2_1 hard block and GTP transceivers
  ☆49Updated 3 months ago
• chili-chips-ba / openXC7-TetriSaraj
  Demo of how to use https://github.com/openXC7 tools (yosys+nextpnr-xilinx) to implement the HW side of a custom SoC with RISC-V CPU & our…
  ☆27Updated 5 months ago
• defparam / PCI2Nano-RTL
  An open source FPGA PCI core & 8250-Compatible PCI UART core
  ☆43Updated 4 years ago
• fontamsoc / pu32
  ☆15Updated 2 months ago
• nand2mario / usb_hid_host
  A compact USB HID host FPGA core supporting keyboards, mice and gamepads.
  ☆133Updated 4 months ago
• tomverbeure / ecp5_jtag
  Use ECP5 JTAG port to interact with user design
  ☆31Updated 4 years ago
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆29Updated last year
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆56Updated 2 years ago