Alternatives and similar repositories for 3DOF-4DOF-Hex:

Users that are interested in 3DOF-4DOF-Hex are comparing it to the libraries listed below

• Toglefritz / Bertram_Robot_Arm
  This repository contains the bill of materials, design files, and firmware for building a giant 3D printed robot arm.
  ☆65Updated 5 years ago
• cguweb-com / Arduino-Projects
  ☆126Updated 4 months ago
• KurtE / Phantom_Phoenix
  Lynxmotion Phoenix code ported to Trossen PhantomX
  ☆96Updated 7 years ago
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆51Updated 2 years ago
• OperationSmallKat / SmallKat_V2
  ☆33Updated 2 years ago
• mithi / hexy
  Code for a hexapod robot
  ☆87Updated 5 years ago
• CGrassin / 3d_lidar
  This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.
  ☆68Updated last year
• bikerglen / robot-arm-v01
  ☆56Updated 7 years ago
• XRobots / CycloidalDrive
  ☆185Updated 11 months ago
• XRobots / miniDogV2
  miniDog V2 CAD and Code
  ☆64Updated 4 years ago
• davidhend / Hexapod
  ☆36Updated 7 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆81Updated 5 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 7 years ago
• siteswapjuggler / RAMP
  Arduino Interpolation Library
  ☆138Updated last month
• JoLamMaker / ThisArm_Firmware
  G-code enabled firmware for Robot Arms
  ☆32Updated 2 years ago
• Toglefritz / Capers_II
  Capers II is a hexapod robot with three degrees of freedom per leg.
  ☆51Updated 6 years ago
• maartenweyn / SpotMicro_ESP32
  ☆41Updated 4 years ago
• ftobler / robotArm
  Software for a 3D Printed Robot Arm
  ☆125Updated 4 years ago
• XRobots / BallContraption
  ☆73Updated 3 years ago
• isaac879 / Delta-Robot
  This repository is for my 3D printed delta robot controlled by an Arduino Nano.
  ☆44Updated 5 years ago
• hyansuper / spotmicro
  ☆25Updated 5 years ago
• XRobots / ROSremote
  ☆33Updated 2 years ago
• miguelasd688 / Quadruped-dog-like-robot
  DIY project of a quadruped robot as a exercise for programming.
  ☆21Updated 4 years ago
• roTechnic / Cheats6DOFInverseKinematics
  Using IKPY to do Inverse kinematics for a 6DOF arm
  ☆33Updated 2 years ago
• JavierIH / zowi
  An open-source and fully hackable biped robot.
  ☆157Updated 8 years ago
• bigtreetech / ramps-1.6
  The RAMPS 1.6 is the second RAMPS iteration released by BIGTREETECH. It replaces the original green power connector with a pair of screw …
  ☆87Updated 4 years ago
• madaeon01 / LumiBee_beta
  ☆82Updated 2 years ago
• Chris-Annin / AE1-CNC-engraver-router
  open source 3 axis machine for engraving router or milling
  ☆33Updated 6 years ago
• SovGVD / esp32-robot-dog-code
  WIP: ESP32 powered robot dog, quadruped robot. This is just code, hardware in the other repositories
  ☆115Updated 2 years ago
• XRobots / ServoSmoothing
  ☆187Updated 3 years ago