Alternatives and similar repositories for antdroid

Users that are interested in antdroid are comparing it to the libraries listed below

• KurtE / Phantom_Phoenix
  Lynxmotion Phoenix code ported to Trossen PhantomX
  ☆98Updated 8 years ago
• 4ndreas / BetaBots-Robot-Arm-Project
  3d printable Robot arm
  ☆364Updated 4 years ago
• XRobots / RobotX
  All the things for RobotX
  ☆126Updated 7 years ago
• antdroid-hexapod / antdroid-hardware
  3D design of Antdroid robot.
  ☆22Updated 8 years ago
• JavierIH / miniKame
  ESP8266 based quadruped with 8DOF and oscillator based gaits.
  ☆412Updated 2 months ago
• plenprojectcompany / PLEN2
  The world's first printable open-source humanoid, starter kit.
  ☆310Updated 4 years ago
• NiryoRobotics / niryo_one
  ☆388Updated 4 years ago
• 4ndreas / Mantis-Robot-Arm
  3d printable Robot arm
  ☆41Updated 8 years ago
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆70Updated 4 years ago
• davidhend / Hexapod
  ☆36Updated 8 years ago
• SmallpTsai / 7688-hexapod
  An 18 DOF Hexpod project using LinkIt Smart 7688 + PCA9685
  ☆76Updated 9 years ago
• vorpalrobotics / VorpalHexapod
  Arduino code for both the Vorpal Hexapod and Vorpal Hexapod Gamepad.
  ☆140Updated 4 years ago
• antdroid-hexapod / antdroid-board
  Antdroid board is a shield for Arduino Mega thinked for Antdroid Hexapod
  ☆10Updated 9 years ago
• michaelkubina / SpotMicroESP32
  My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…
  ☆349Updated 9 months ago
• ArcBotics / Hexy
  Hexy the Open-Source, Low-Cost Hexapod
  ☆121Updated 6 years ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆94Updated 7 years ago
• jochenalt / Walter
  6DOF Industrial Robot, vintage style
  ☆147Updated 8 years ago
• chilipeppr / robot-actuator-esp32-v8
  This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.
  ☆227Updated 4 years ago
• regishsu / SpiderRobot
  ☆107Updated 9 years ago
• XRobots / CycloidalDrive
  ☆201Updated last year
• BCN3D / BCN3DSigma-Mechanics
  All the mechanics of the BCN3D Sigma 3D Printer.
  ☆103Updated 7 years ago
• Toglefritz / Capers_II
  Capers II is a hexapod robot with three degrees of freedom per leg.
  ☆55Updated 7 years ago
• bikerglen / robot-arm-v01
  ☆58Updated 7 years ago
• AngelLM / Asgard
  GUI for Thor developed using PyQt5
  ☆25Updated last week
• JavierIH / zowi
  An open-source and fully hackable biped robot.
  ☆160Updated 9 years ago
• uArm-Developer / UArmForArduino
  Arduino uArm Metal Library (uArm Metal only)
  ☆85Updated 7 years ago
• Toglefritz / Bertram_Robot_Arm
  This repository contains the bill of materials, design files, and firmware for building a giant 3D printed robot arm.
  ☆69Updated 6 years ago
• G-Levine / OpenTorque-Actuator
  OpenTorque Actuator: A powerful, compliant actuator for legged robotics.
  ☆358Updated 6 years ago
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆53Updated 3 years ago
• maxosprojects / dobot-arm-CAD
  dobot-arm CAD files
  ☆65Updated 9 years ago