Alternatives and similar repositories for SmallKat_V2

Users that are interested in SmallKat_V2 are comparing it to the libraries listed below

• jochenalt / Walter
  6DOF Industrial Robot, vintage style
  ☆154Updated 8 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 6 years ago
• ottoragam / Brushed-DC-Servo-Drive
  Low cost servo drive for small CNC machinery
  ☆54Updated 9 years ago
• gouldpa / Triple-Cycloidal-Robot-Arm-Proto-2
  ☆23Updated 5 years ago
• XRobots / RobotX
  All the things for RobotX
  ☆129Updated 7 years ago
• MarginallyClever / sixi
  Sixi Robot Arm
  ☆23Updated 6 years ago
• XRobots / PerformanceRobots
  ☆39Updated 5 years ago
• bikerglen / robot-arm-v01
  ☆58Updated 8 years ago
• DizzyRobot / DirectServo
  Controller that drives BLDC motor as servo
  ☆74Updated 6 years ago
• mawildoer / cycloidal_generator
  A cycloidal reduction drive generator script for Fusion360
  ☆118Updated 5 years ago
• PCrnjak / 3D-printed-Hexapod
  Code and STL files for small 18 servo hexapod.
  ☆33Updated last year
• JRodrigoTech / xLIDAR
  Affordable and open-source LIDAR based on three VL53L0X ranging sensor.
  ☆68Updated 7 years ago
• JoeyByrnes / OpenLeg
  Hardware and Software for an Open Source Robotic Leg
  ☆80Updated 2 years ago
• chilipeppr / robot-actuator-esp32-v8
  This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.
  ☆231Updated 5 years ago
• MarginallyClever / sixi-2
  Sixi 2 Robot Arm
  ☆35Updated 4 years ago
• uStepper / uStepperS
  ☆53Updated 2 years ago
• jhaupt / NearZero1
  Firmware for the NearZero Brushless Motor Controller
  ☆46Updated 5 years ago
• Seeed-Studio / Seeed_Arduino_AS5600
  The library comes with AS5600. Through this library, we can realize read the angles 、get magnetic from a magnet underneath the sensor.
  ☆121Updated 11 months ago
• elkayem / ZippyTheBalancingRobot
  A 3D printed balancing robot
  ☆75Updated 8 years ago
• byDagor / Janus-Controller
  The Janus Controller is a Brushless motor driver with an on-board magnetic encoder, a three-phase MOSFET driver, three MOSFET half-bridge…
  ☆129Updated 4 years ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆95Updated 7 years ago
• mjbots / pi3hat
  ☆43Updated last month
• uStepper / uStepper
  Repository for uStepper
  ☆100Updated 6 years ago
• deltarobotone / how_to_build_your_robot
  Build manual for Delta-Robot One
  ☆28Updated 5 years ago
• aspro648 / OSTR
  Open Source Turtle Robot
  ☆84Updated 2 years ago
• isaac879 / Delta-Robot
  This repository is for my 3D printed delta robot controlled by an Arduino Nano.
  ☆51Updated 6 years ago
• ftobler / robotArm
  Software for a 3D Printed Robot Arm
  ☆138Updated 5 months ago
• JacquinBuchanan / Intellisaurus
  walking robot kit
  ☆17Updated 6 years ago
• KoshiroRobot / Simple-Smart-Servo-Driver
  ☆47Updated last year
• kanestoboi / AS5600
  An Arduino library for the AS5600 magnetic encoder
  ☆37Updated 3 years ago