Alternatives and similar repositories for Qwiic_Ublox_Gps_Py

Users that are interested in Qwiic_Ublox_Gps_Py are comparing it to the libraries listed below

• semuconsulting / pyubx2
  Python library for parsing and generating UBX GPS/GNSS protocol messages.
  ☆205Updated last week
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, RTCM3, NTRIP and SPARTN protocols
  ☆104Updated 2 weeks ago
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• sparkfun / SparkFun_u-blox_GNSS_v3
  An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
  ☆68Updated this week
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• aussierobots / ublox_dgnss
  This usb based ROS2 driver is focused on UBLOX Generation 9 UBX messaging, for a DGNSS rover. High precision data is available.
  ☆45Updated 2 months ago
• septentrio-gnss / septentrio_gnss_driver
  ROS 1 & 2 driver for Septentrio GNSS & INS receivers
  ☆94Updated this week
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆93Updated 2 months ago
• semuconsulting / pynmeagps
  Python library for parsing and generating NMEA 0183 GNSS/GPS protocol messages.
  ☆91Updated last week
• jcmb / NTRIP
  NTRIP, VRS, IBSS Tools
  ☆44Updated last year
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆60Updated last year
• u-blox / ublox-C099_F9P-uCS
  ☆60Updated 4 years ago
• ros-agriculture / ublox_f9p
  ROS driver for ublox ZED-F9P receiver
  ☆55Updated 3 years ago
• KumarRobotics / ublox
  A driver for ublox gps
  ☆490Updated this week
• sparkfun / SparkFun_u-blox_GNSS_Arduino_Library
  An Arduino library which allows you to communicate seamlessly with the full range of u-blox GNSS modules
  ☆252Updated 2 months ago
• adafruit / Adafruit_CircuitPython_BNO055
  CircuitPython driver for BNO055 absolute orientation sensor
  ☆89Updated 3 months ago
• sparkfun / SparkFun_Ublox_Arduino_Library
  Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
  ☆146Updated 4 years ago
• Korving-F / ublox
  Python library for the UBX protocol
  ☆38Updated 4 years ago
• flynneva / bno055
  ROS2 driver for Bosch BNO055 using UART or I2C
  ☆107Updated last year
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆43Updated last year
• dalymople / ubxtranslator
  A simple python parser for UBX messages
  ☆26Updated 11 months ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆94Updated 6 years ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆54Updated 2 years ago
• septentrio-gnss / Septentrio_AgnosticCorrectionsProgram
  ☆15Updated last month
• tridge / pyUblox
  python Ublox module
  ☆105Updated last year
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆106Updated 8 months ago
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆54Updated 10 months ago
• gokulp01 / ros2-ublox-zedf9p
  ROS2 drivers for U-blox ZED F9P
  ☆43Updated 8 months ago
• goromal / ublox-F9P
  ROS driver package for the u-blox ZED-F9P GPS module.
  ☆14Updated 4 years ago
• LORD-MicroStrain / ntrip_client
  ROS NTRIP client
  ☆77Updated last month