Alternatives and similar repositories for RTCM-Pi

Users that are interested in RTCM-Pi are comparing it to the libraries listed below

• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆35Updated this week
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆96Updated this week
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆22Updated 9 months ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆60Updated last year
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• u-blox / ublox-C099_F9P-uCS
  ☆60Updated 5 years ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• Korving-F / ublox
  Python library for the UBX protocol
  ☆38Updated 4 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆114Updated 10 months ago
• sparkfun / SparkFun_u-blox_GNSS_v3
  An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
  ☆75Updated 2 weeks ago
• jangleboom / RTKBaseStation
  Real time kinematics base station (ESP32 + ZED-F9P)
  ☆37Updated 2 years ago
• mazgch / hpg
  This project demonstrates a full RTK solution with built in correction services.
  ☆100Updated 6 months ago
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆55Updated last year
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆23Updated last year
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• incarvr6 / esp32-ntrip-DUO
  ESP32 NTRIP Interface
  ☆57Updated 5 months ago
• GNSSOEM / ELT_RTKBase
  Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5
  ☆49Updated this week
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆31Updated 3 years ago
• nebkat / esp32-xbee
  ESP32 XBee UART Interface
  ☆106Updated 2 years ago
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆21Updated 9 months ago
• imfatant / test
  ☆64Updated 5 years ago
• ArduPilot / MethodicConfigurator
  A clear ArduPilot configuration sequence
  ☆84Updated last week
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, RTCM3, NTRIP and SPARTN protocols
  ☆111Updated this week
• rotoye / batmon_reader
  Microcontroller files to access the Batmon battery monitor
  ☆23Updated 2 weeks ago
• lansalot / FreeRTK
  How to set up your own RTK base station
  ☆41Updated last year
• ArduPilot / ArduRemoteID
  RemoteID support using OpenDroneID
  ☆131Updated last week
• mtz8302 / AOG_GPS_ESP32
  DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …
  ☆41Updated 2 years ago
• sparkfun / SparkFun_Ublox_Arduino_Library
  Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
  ☆146Updated 4 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆94Updated 6 years ago
• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆41Updated 6 years ago