Alternatives and similar repositories for simpleRTK2B

Users that are interested in simpleRTK2B are comparing it to the libraries listed below

• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆98Updated 6 years ago
• u-blox / ublox-C099_F9P-uCS
  ☆62Updated 5 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆124Updated last year
• Francklin2 / RTKLIB_Touchscreen_GUI
  RTKLIB GUI for Raspberry Pi with touchscreen made with Qt by the ENSG students
  ☆188Updated 6 years ago
• eringerli / RpiNtripBase
  ☆51Updated 5 years ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆60Updated 2 years ago
• jcmb / NTRIP
  NTRIP, VRS, IBSS Tools
  ☆46Updated 2 months ago
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆24Updated last year
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, QGC, RTCM3, NTRIP and SPARTN protocols
  ☆130Updated last month
• tridge / pyUblox
  python Ublox module
  ☆105Updated 2 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆102Updated last month
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆50Updated 2 years ago
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• emlid / RTKLIB
  Emlid's fork of Tomoji Takasu's RTKLIB used in Reach RTK receiver
  ☆78Updated 4 years ago
• FlyTheThings / uNavINS
  ☆51Updated 7 years ago
• baidu / ntripcaster
  ☆46Updated 7 years ago
• mtz8302 / AOG_GPS_ESP32
  DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …
  ☆42Updated 2 years ago
• GormR / HW_for_AgOpenGPS
  Autosteering and RTK-GNSS units for AgOpenGPS / QtOpenGuidance
  ☆67Updated 3 years ago
• jancelin / RTKlibDroid
  Rtklib for android linux (Userland)
  ☆25Updated 5 years ago
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆56Updated last year
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆106Updated 2 months ago
• sparkfun / Qwiic_Ublox_Gps_Py
  ☆80Updated last year
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆22Updated last year
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆58Updated 6 years ago
• CentipedeRTK / RtkBaseVar
  🛰️ 📡 Broadcasting the RTCM3 correction from the nearest RTK base 📍
  ☆21Updated last year
• mkameke / ZED-F9P_Raw_Data_Logger
  A raw data logger based on the u-blox ZED-F9P GNSS receiver intended for use with Precise Point Positioning (PPP) and Post-Processed Kine…
  ☆12Updated 5 years ago
• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆42Updated 6 years ago
• GNSSOEM / ELT_RTKBase
  Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5
  ☆62Updated this week