Alternatives and similar repositories for pyUBX

Users that are interested in pyUBX are comparing it to the libraries listed below

• tridge / pyUblox
  python Ublox module
  ☆105Updated 2 years ago
• semuconsulting / pynmeagps
  Python library for parsing and generating NMEA 0183 GNSS/GPS protocol messages.
  ☆104Updated last week
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, QGC, RTCM3, NTRIP and SPARTN protocols
  ☆133Updated last month
• semuconsulting / pyubx2
  Python library for parsing and generating UBX GPS/GNSS protocol messages.
  ☆243Updated 2 months ago
• u-blox / ublox-C099_F9P-uCS
  ☆62Updated 5 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆126Updated last year
• emlid / RTKLIB
  Emlid's fork of Tomoji Takasu's RTKLIB used in Reach RTK receiver
  ☆78Updated 4 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆102Updated 2 months ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 6 years ago
• sparkfun / SparkFun_Ublox_Arduino_Library
  Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
  ☆149Updated 5 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆98Updated 6 years ago
• jcmb / NTRIP
  NTRIP, VRS, IBSS Tools
  ☆46Updated 3 months ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• Korving-F / ublox
  Python library for the UBX protocol
  ☆37Updated 5 years ago
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆107Updated 2 months ago
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆58Updated 6 years ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 4 years ago
• Francklin2 / RTKLIB_Touchscreen_GUI
  RTKLIB GUI for Raspberry Pi with touchscreen made with Qt by the ENSG students
  ☆188Updated 6 years ago
• nunojpg / ntripserver
  Ntrip Version 2.0 Command Line Server
  ☆72Updated 10 years ago
• dalymople / ubxtranslator
  A simple python parser for UBX messages
  ☆26Updated last week
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆56Updated last year
• sparkfun / SparkFun_u-blox_GNSS_v3
  An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
  ☆95Updated last month
• taroz / GNSS-Radar
  GNSS-Radar is a web application to show the current GNSS constellation
  ☆95Updated 11 years ago
• emlid / ntripbrowser
  CLI tool to easily get NTRIP caster information
  ☆33Updated 6 months ago
• jcmb / RTCM3
  Obsolete System for Parsing RTCM3.x packets
  ☆45Updated 6 years ago
• commschamp / cc.ublox.commsdsl
  CommsDSL schema-based definition of UBLOX protocol
  ☆43Updated last month
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆22Updated last year
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆60Updated 2 years ago
• DfAC / AndroidGNSS
  Code supporting raw ranges for the Android
  ☆44Updated 6 years ago
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆51Updated 2 years ago