Alternatives and similar repositories for pyubx2

Users that are interested in pyubx2 are comparing it to the libraries listed below

• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, QGC, RTCM3, NTRIP and SPARTN protocols
  ☆128Updated this week
• semuconsulting / PyGPSClient
  Python Graphical GPS Client Application supporting NMEA, UBX, SBF, QGC, RTCM3, NTRIP & SPARTN Protocols
  ☆747Updated this week
• semuconsulting / pynmeagps
  Python library for parsing and generating NMEA 0183 GNSS/GPS protocol messages.
  ☆101Updated this week
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆105Updated last month
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆123Updated last year
• rtklibexplorer / RTKLIB
  A version of RTKLIB optimized for low cost GNSS receivers, especially u-blox receivers. It is based on RTKLIB 2.4.3. This software is p…
  ☆851Updated this week
• u-blox / ublox-C099_F9P-uCS
  ☆63Updated 5 years ago
• Stefal / rtkbase
  Your own GNSS base station for RTK localization with a Web GUI
  ☆686Updated last week
• rtklibexplorer / rtklib-py
  Python implementation of RTKLIB. Based on demo5 version. Currently only supports PPK solutions
  ☆224Updated 2 years ago
• tomojitakasu / PocketSDR
  ☆421Updated 8 months ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 4 years ago
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆56Updated last year
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆102Updated last week
• nunojpg / ntripserver
  Ntrip Version 2.0 Command Line Server
  ☆72Updated 10 years ago
• Francklin2 / RTKLIB_Touchscreen_GUI
  RTKLIB GUI for Raspberry Pi with touchscreen made with Qt by the ENSG students
  ☆187Updated 6 years ago
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆50Updated 2 years ago
• Stanford-NavLab / gnss_lib_py
  Modular Python tool for parsing, analyzing, and visualizing Global Navigation Satellite Systems (GNSS) data and state estimates
  ☆232Updated 8 months ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆97Updated 6 years ago
• ybzwyrcld / ntrip
  Simple ntrip caster/client/server example programs, using the NTRIP2.0 protocol
  ☆178Updated 2 years ago
• tomojitakasu / RTKLIB_bin
  ☆367Updated 2 years ago
• sparkfun / Qwiic_Ublox_Gps_Py
  ☆80Updated 11 months ago
• emlid / RTKLIB
  Emlid's fork of Tomoji Takasu's RTKLIB used in Reach RTK receiver
  ☆78Updated 4 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• hirokawa / cssrlib
  Python Toolkit for satellite-based open PPP/PPP-RTK services
  ☆182Updated this week
• eringerli / RpiNtripBase
  ☆51Updated 4 years ago
• sparkfun / SparkFun_u-blox_GNSS_Arduino_Library
  An Arduino library which allows you to communicate seamlessly with the full range of u-blox GNSS modules
  ☆271Updated 4 months ago
• barbeau / awesome-gnss
  Community list of open-source GNSS software and resources
  ☆519Updated 2 months ago
• nunojpg / rtcm3torinex
  Real-time converter from NTRIP streamed RTCM3 data to RINEX
  ☆62Updated 10 years ago
• tridge / pyUblox
  python Ublox module
  ☆105Updated 2 years ago