Alternatives and similar repositories for kuchen:

Users that are interested in kuchen are comparing it to the libraries listed below

• machdyne / lowe
  Löwe FPGA Board
  ☆12Updated last year
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆28Updated 9 months ago
• enjoy-digital / litex_rp2040_pmod_test
  Test of a RP2040 PMOD attached to a LiteX SoC.
  ☆25Updated last year
• fallen / SucreLA
  Open source Logic Analyzer based on LiteX SoC
  ☆25Updated 2 weeks ago
• TinyTapeout / tt-demo-pcb
  Demo board for TT4 and beyond
  ☆21Updated 2 months ago
• FPGAwars / FLIX-V
  FLIX-V: FPGA, Linux and RISC-V
  ☆41Updated last year
• blackmesalabs / sump3
  sump3 logic analyzer
  ☆19Updated last week
• mkvenkit / humble_ice
  A low cost FPGA development board based on Lattice iCE40UP5k and Raspberry Pi RP2040.
  ☆42Updated 2 years ago
• mattvenn / wokwi-verilog-gds-test
  ☆55Updated 2 years ago
• cr1901 / sentinel
  Another size-optimized RISC-V CPU for your consideration.
  ☆58Updated 3 weeks ago
• hydrausb3 / wch-ch56x-bsp
  WCH CH56x BSP for HydraUSB3 v1 hardware
  ☆17Updated last year
• stnolting / cjtag_bridge
  🔌 Compact JTAG ("cJTAG") to 4-wire JTAG (IEEE 1149.1) bridge.
  ☆24Updated 3 years ago
• lawrie / ulx3s_bit_streams
  Bit streams forthe Ulx3s ECP5 device
  ☆17Updated 2 years ago
• gregdavill / CH32V003-makefile-example
  CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs
  ☆16Updated 2 years ago
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆97Updated last year
• ulixxe / usb_dfu
  Full Speed USB DFU interface for FPGA and ASIC designs
  ☆17Updated last year
• Chalandi / Blinky_Pico2_dual_core_nosdk
  Bare-metal programming on RP2350 dual-core ARM Cortex-m33/RISC-V Hazard3 (non-SDK)
  ☆13Updated 6 months ago
• mattvenn / vga-clock
  Show the time on a VGA monitor. Submitted for the Google MPW1 ASIC shuttle.
  ☆59Updated 3 years ago
• mattvenn / vga_clock_pcb
  Open source hardware down to the chip level!
  ☆30Updated 3 years ago
• machdyne / endlos
  Endlos Computer
  ☆11Updated 7 months ago
• Efinix-Inc / xyloni
  This repo is for Efinix Xyloni development board users. It has projects and software to get you started working with the board.
  ☆42Updated 2 years ago
• hansfbaier / ch569-usb3-board
  USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569
  ☆26Updated 2 years ago
• OneKiwiTech / kicad-length-matching
  Track Length Calculator
  ☆24Updated last year
• hydrausb3 / hydrausb3_hw
  HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, …
  ☆32Updated last year
• icebreaker-fpga / icebreaker-litex-examples
  Example litex Risc-V SOC and some example code projects in multiple languages.
  ☆67Updated last year
• hydrausb3 / wch-ch569-serdes
  WCH CH569 SerDes Reverse Engineering
  ☆26Updated 2 years ago
• mattvenn / ws2812-core
  verilog core for ws2812 leds
  ☆32Updated 3 years ago
• kazkojima / colorlight-i5-tips
  Tiny tips for Colorlight i5 FPGA board
  ☆57Updated 4 years ago
• sipeed / sigrok_slogic
  sigrok_slogic
  ☆14Updated last week
• psychogenic / caravel-breakout-pcb
  ☆17Updated last year