Alternatives and similar repositories for lushay-code

Users that are interested in lushay-code are comparing it to the libraries listed below

• calint / tang-nano-9k--riscv--cache-psram
  RISC-V implementation of RV32I for FPGA board Tang Nano 9K utilizing on-board burst PSRAM, flash and SD card
  ☆40Updated 3 weeks ago
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆105Updated last month
• blackmesalabs / hyperram
  Portable Verilog RTL interface to S27KL0641DABHI020 64Mbit HyperRAM IC
  ☆91Updated 7 years ago
• benitoss / ColorLight_FPGA_boards
  Update IceStudio to support ColorLight 5A-75X, i5 and ICeSugar Pro FPGA boards
  ☆49Updated 2 years ago
• smunaut / iCE40linux
  Gateware / Firmware / BuildRoot to run linux on iCE40 / iCEBreaker
  ☆101Updated 2 years ago
• colognechip / gatemate_ila
  The ILA allows you to perform in-system debugging of your designs on the GateMate FPGA at runtime. All signals of your design inside the …
  ☆55Updated 3 weeks ago
• no2fpga / no2usb
  Nitro USB FPGA core
  ☆86Updated last year
• efabless / clear
  ☆70Updated last year
• ulx3s / fpga-odysseus
  FPGA Odysseus with ULX3S
  ☆68Updated last year
• cr1901 / sentinel
  Another size-optimized RISC-V CPU for your consideration.
  ☆57Updated 2 weeks ago
• openXC7 / demo-projects
  Demo projects for various Kintex FPGA boards
  ☆62Updated 4 months ago
• emard / ulx3s-misc
  Miscellaneous ULX3S examples (advanced)
  ☆80Updated 3 months ago
• splinedrive / kianFpgaPong
  Basic Pong you can extend with rotary, sound, vga generator and autopilot
  ☆11Updated 3 years ago
• kazkojima / colorlight-i5-tips
  Tiny tips for Colorlight i5 FPGA board
  ☆57Updated 4 years ago
• meiniKi / FazyRV
  A minimal-area RISC-V core with a scalable data path to 1, 2, 4, or 8 bits and manifold variants.
  ☆107Updated last month
• Wren6991 / Hazard5
  5-stage RISC-V CPU, originally developed for RISCBoy
  ☆32Updated 2 years ago
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆29Updated last year
• openXC7 / toolchain-installer
  Convenience script to install the nextpnr-xilinx toolchain for Kintex7, Artix7, Spartan7 and Zynq7
  ☆90Updated 3 months ago
• bieganski / mtkcpu
  RISC-V CPU implementation in Amaranth HDL (aka nMigen)
  ☆32Updated last year
• zf3 / psram-tang-nano-9k
  An open source PSRAM/HyperRAM controller for Sipeed Tang Nano 9K / Gowin GW1NR-LV9QN88PC6/15 FPGA
  ☆82Updated 3 years ago
• regymm / pcie_7x
  PCIe Endpoint on Xilinx 7-Series FPGAs with the PCIE_2_1 hard block and GTP transceivers
  ☆61Updated 5 months ago
• lawrie / ulx3s_examples
  Example Verilog code for Ulx3s
  ☆42Updated 3 years ago
• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆69Updated last year
• gregdavill / ecpprog
  Programmer for the Lattice ECP5 series, making use of FTDI based adaptors
  ☆89Updated 11 months ago
• MJoergen / HyperRAM
  Portable HyperRAM controller
  ☆60Updated 10 months ago
• mattvenn / basic-ecp5-pcb
  Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs
  ☆119Updated 4 years ago
• GMM-7550 / gmm7550-hardware
  CologneChip GateMate FPGA Module: GMM-7550
  ☆24Updated last week
• OLIMEX / GateMateA1-EVB
  Development board for GateMateA1 CCGM1A1 FPGA from Cologne Chip with PS2 VGA 64Mbit RAM RP2040
  ☆33Updated 10 months ago
• verilog-indeed / nano4k_hdmi_tx
  Open-source HDMI/DVI transmitter for the Gowin GW1NSR-powered Tang Nano 4K
  ☆23Updated 3 years ago
• nand2mario / usb_hid_host
  A compact USB HID host FPGA core supporting keyboards, mice and gamepads.
  ☆139Updated 6 months ago