jsphuebner / stm32-templateLinks
Empty Openinverter project to start your own
☆15Updated last year
Alternatives and similar repositories for stm32-template
Users that are interested in stm32-template are comparing it to the libraries listed below
Sorting:
- ☆10Updated 2 years ago
- Generic modules that can be used in many projects☆29Updated 2 months ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- Eagle schematics of inverter main board, sensor boards and gate drivers☆77Updated 3 years ago
- Repurposes the openinverter main board as a buck or boost mode charger☆16Updated 2 years ago
- Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.☆18Updated 2 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆72Updated 6 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆61Updated 8 months ago
- Yet another USB-CAN adapter.☆14Updated 3 years ago
- Open Inverter - Alternative Web Interface☆34Updated 4 years ago
- Prius Gen 3 buck/boost converter charger controller - buck mode charging☆14Updated 5 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- Main firmware of the Huebner inverter project☆181Updated 2 weeks ago
- Open source project that uses the CANable hardware from protofusion.org☆44Updated 4 months ago
- ARCHIVE: Lebowski controller IC 2.A1 source code and (short) explanation☆19Updated 5 years ago
- ☆20Updated 8 months ago
- ☆26Updated 6 years ago
- STM32F1 CAN bootloader☆17Updated 5 years ago
- An open hardware platform for experimenting with DC-to-AC conversion, power and energy metering and grid tie inverters.☆72Updated last year
- Firmware to support gs_usb on most STM32 devices☆53Updated 3 months ago
- Firmware for the DieBieMS☆57Updated 4 years ago
- ☆51Updated 6 years ago
- This project is aimed to get the SoC by using current integration method which measure the current passing through current sensor while c…☆10Updated 6 years ago
- STM32 G4 and STM32 H7 CANFD Driver☆17Updated 9 months ago
- Web interface for Huebner inverter☆36Updated last year
- CAN (Dual) bus Arduino library for stm32F042, stm32F103, stm32F105, stm32F107, stm32L4, stm32F4☆28Updated 2 years ago
- This is an Open Source Hardware USB to CAN-FD Interface☆75Updated 3 weeks ago
- University project: Simple micro-inverter using a STM32F103C8☆37Updated 4 years ago
- Use openinverter hardware as an island (non-grid connected) inverter☆16Updated 4 years ago
- STM32 CAN-bus bootloader☆79Updated 9 years ago