sebdehne / SmartHomeServerLinks
Smarthome backend
☆11Updated last month
Alternatives and similar repositories for SmartHomeServer
Users that are interested in SmartHomeServer are comparing it to the libraries listed below
Sorting:
- Smart Electric Vehicle Charging Station (EVSE)☆179Updated last week
- Smart EVSE Electric Vehicle Charging Station☆99Updated 4 years ago
- Firmware for Open EVSE☆136Updated 8 months ago
- Smart Electric Vehicle Charging Station (EVSE)☆95Updated last month
- A simple car simulator PCB for testing EVSE.☆52Updated 2 years ago
- Brings EVSE WB/DIN into your WiFi☆81Updated 2 years ago
- OpenEVSE Hardware☆193Updated 6 months ago
- OpenEVSE V4 WiFi gateway using ESP32☆202Updated 2 weeks ago
- ESP32 talks via SPI with QCA7005 PLC modem☆23Updated 2 years ago
- a ESP32-S3 talks to a QCA7005 to read the SOC of a car☆24Updated 2 years ago
- Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32☆13Updated 4 months ago
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.☆35Updated 7 months ago
- Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)☆44Updated 4 years ago
- Electric vehicle CCS charging investigations with Python☆199Updated last month
- ESP32 EVSE firmware☆106Updated this week
- Firmware for OpenEnergyMonitor OpenEVSE☆18Updated 3 years ago
- LG Resu 10 LV Monitor☆30Updated 5 years ago
- SimpBMS Documentation☆89Updated 2 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆83Updated 3 months ago
- Arduino firmware for DehneEVSE charging station☆59Updated 2 years ago
- Firmware battery safety controller (BSC)☆130Updated this week
- Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485☆80Updated 2 years ago
- JK BMS to PYLON CANBUS Protocol converter☆37Updated 2 years ago
- Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…☆193Updated 2 weeks ago
- Simple ESP32 firmware for Type2 BEV charging☆14Updated 2 years ago
- EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.☆152Updated last month
- ☆17Updated 2 years ago
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆28Updated 2 years ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆17Updated 3 months ago
- ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters☆43Updated 4 years ago