Alternatives and similar repositories for BMWPhevBMS:

Users that are interested in BMWPhevBMS are comparing it to the libraries listed below

• damienmaguire / BMW_SBox
  Reverse Engineering of the BMW SBox for use in ev conversion projects
  ☆11Updated last year
• jsphuebner / esp32-web-interface
  ☆16Updated last month
• collin80 / CRC_Nissan
  C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs
  ☆11Updated 10 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆52Updated 4 years ago
• jamiejones85 / ESP32-BMS
  An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.
  ☆15Updated 2 years ago
• Tom-evnut / VW-bms
  Can based decoding of VW bms data
  ☆35Updated 11 months ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆36Updated last month
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆46Updated last year
• damienmaguire / Tesla-Model-3-Charge-Port-Controller
  Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU
  ☆21Updated 3 years ago
• jglim / OkayCAN
  The okayest ESP32-S2 CAN development board
  ☆17Updated 3 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆69Updated 6 years ago
• jsphuebner / tumanako-inverter-fw-bootloader
  ☆10Updated last year
• damienmaguire / CAN-BUS-Man-In-The-Middle
  CAN BUS Man In The Middle for spying on and modifyling automotive can traffic on the fly.
  ☆31Updated 5 years ago
• damienmaguire / MG-EV-Charger
  Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles
  ☆12Updated last year
• damienmaguire / Lexus-GS450H-Inverter-Controller
  Opensource controller for the Lexus GS450H Hybrid inverter and gearbox
  ☆20Updated 3 years ago
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆31Updated 11 years ago
• Tom-evnut / BMWI3BMS
  SIMPBMS code for I3 Modules
  ☆43Updated last year
• EliasKotlyar / Canfilter
  Can Filter with STM32F105RBT Reverse Engeneering
  ☆35Updated 2 years ago
• jsphuebner / stm32-island
  Use openinverter hardware as an island (non-grid connected) inverter
  ☆16Updated 4 years ago
• Longan-Labs / Longan_CAN_MCP2515
  Arduino Library for CAN Bed
  ☆26Updated 3 years ago
• mdrobnak / cpcontrol-redacted
  Redacted code for Rust-based Charge Port Controller
  ☆11Updated 4 years ago
• mackelec / meCAN
  CAN (Dual) bus Arduino library for stm32F042, stm32F103, stm32F105, stm32F107, stm32L4, stm32F4
  ☆23Updated 2 years ago
• jsphuebner / stm32-car
  Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
  ☆56Updated 2 weeks ago
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆99Updated 6 years ago
• dalathegreat / EV-CANlogs
  Collection of CAN logs from different electric vehicles
  ☆30Updated 6 months ago
• MrAzE / arduino_canbus
  Examples of Arduino code used to communicate with canbus.
  ☆10Updated 8 years ago
• p1ne / fdim-controller
  Schematic, PCB and source code for a small Arduino-based controller to make Ford FDIM dash display useful again
  ☆40Updated 3 years ago
• HeinrichG-V12 / E65_ReverseEngineering
  ☆38Updated 3 years ago
• bill57p9 / BMW_ZGW_emulator
  BMW CANbus gateway emulator & proxy
  ☆18Updated 4 years ago
• beyerch / DHP_Kepler
  Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)
  ☆36Updated 6 years ago