Alternatives and similar repositories for qleaf

Users that are interested in qleaf are comparing it to the libraries listed below

• jamiejones85 / ESP32-Chademo
  ESP32 Based Chademo implementation
  ☆16Updated 10 months ago
• dalathegreat / EV-CANlogs
  Collection of CAN logs from different electric vehicles
  ☆33Updated 10 months ago
• dalathegreat / leaf_can_bus_messages
  LEAF CAN bus message decoding with proper database files
  ☆195Updated 2 months ago
• damienmaguire / MG-EV-Charger
  Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles
  ☆15Updated last year
• dalathegreat / Nissan-LEAF-CCS
  Information for how to add CCS to your LEAF, keeping it relevant for many years to come!
  ☆78Updated last year
• damienmaguire / Nissan-Leaf-Inverter-Controller
  OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter
  ☆61Updated 4 years ago
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆80Updated last month
• jsphuebner / stm32-car
  Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
  ☆60Updated 3 months ago
• davefiddes / openinverter-can-tool
  A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection
  ☆17Updated this week
• damienmaguire / VW-OnBoard-Charger
  Hacking and reverse engineering of the VW Onboard AC chargers
  ☆15Updated last year
• angusjo / leaf-splines
  leaf spline revers engineering
  ☆14Updated 4 years ago
• Isaac96 / CHAdeMOSoftware
  Software for Damien Maguire's CHAdeMO controller
  ☆21Updated 4 years ago
• wjcloudy / DBCtoRDXML
  File converter from DBC to RealDash XML
  ☆16Updated 2 months ago
• dalathegreat / Nissan-Leaf-Bruteforce-Upgrade
  Software for correcting instrumentation on a battery "bruteforce" upgraded LEAF
  ☆22Updated 4 years ago
• jsphuebner / stm32-CANBootloader
  Bootloader project to update for example STM32F107 / GD32F107 chips
  ☆15Updated 11 months ago
• HeinrichG-V12 / E65_ReverseEngineering
  ☆42Updated 3 years ago
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆46Updated last year
• corygrant / CANBoard_HW
  Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
  ☆39Updated 2 months ago
• uhi22 / Ioniq28Investigations
  reverse engineering of Hyundai Ioniq (classic, production 2018)
  ☆19Updated last week
• uhi22 / ccs32clara
  STM32 with QCA7005 as CCS charge controller
  ☆82Updated last week
• damienmaguire / Stm32-vcu
  A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.
  ☆168Updated last week
• damienmaguire / BMW_SBox
  Reverse Engineering of the BMW SBox for use in ev conversion projects
  ☆11Updated 2 years ago
• damienmaguire / Chademo-Fast-Charge-Controller
  Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles
  ☆43Updated 4 years ago
• Tom-evnut / BMWI3BMS
  SIMPBMS code for I3 Modules
  ☆46Updated last year
• collin80 / JLD505
  ☆25Updated 9 years ago
• dzid26 / opendbc-BMW-E8x-E9x
  BMW E-series dbc
  ☆69Updated last week
• laurynas / volvo_linbus
  Volvo LIN bus reader
  ☆92Updated 4 years ago
• jamiejones85 / ESP32-BMS
  An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.
  ☆15Updated 2 years ago
• dalathegreat / Nissan-Leaf-Battery-to-OBD2
  An opensource solution for connecting OBD2 straight to the Nissan Leaf battery
  ☆59Updated 10 months ago
• bill57p9 / BMW_ZGW_emulator
  BMW CANbus gateway emulator & proxy
  ☆19Updated 4 years ago