mdrobnak / cpcontrol-redacted
Redacted code for Rust-based Charge Port Controller
☆11Updated 4 years ago
Alternatives and similar repositories for cpcontrol-redacted:
Users that are interested in cpcontrol-redacted are comparing it to the libraries listed below
- Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU☆20Updated 3 years ago
- Collection of CAN logs from different electric vehicles☆29Updated 4 months ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆58Updated 3 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated last year
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated last year
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated 10 months ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- Software for Damien Maguire's CHAdeMO controller☆19Updated 4 years ago
- Use openinverter hardware as an island (non-grid connected) inverter☆15Updated 4 years ago
- Open Source Logic board to control the Tesla Model S Front Drive Unit☆51Updated 3 years ago
- 7th generation GEVCU source code☆21Updated 2 months ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆55Updated last month
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆39Updated 3 years ago
- Software for correcting instrumentation on a battery "bruteforce" upgraded LEAF☆22Updated 4 years ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- ESP32 Based Chademo implementation☆15Updated 4 months ago
- My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.☆11Updated 7 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆15Updated last week
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆19Updated 3 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆74Updated last month
- leaf spline revers engineering☆12Updated 4 years ago
- ☆14Updated 5 months ago
- Generalized Vehicle Control Unit for version 6 boards☆25Updated 8 months ago
- ☆10Updated last year
- Can Filter with STM32F105RBT Reverse Engeneering☆35Updated 2 years ago
- C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs☆11Updated 10 years ago
- Firmware for canbus boxes☆73Updated last year
- CAN Reverse engineering tool for ESP32-S3 based boards☆13Updated last year
- Prius Gen 3 buck/boost converter charger controller - buck mode charging☆11Updated 4 years ago
- ☆37Updated 2 years ago