Alternatives and similar repositories for thunderscope:

Users that are interested in thunderscope are comparing it to the libraries listed below

• 360nosc0pe / scope
  Siglent SDS1x0xX-E FPGA bitstreams
  ☆41Updated 3 months ago
• lambdaconcept / usbsniffer
  Gateware for USB2Sniffer
  ☆26Updated 3 years ago
• fallen / SucreLA
  Open source Logic Analyzer based on LiteX SoC
  ☆25Updated 3 months ago
• hansfbaier / colorlight-qmtech-adapter
  Adapter to use Colorlight i5/i9 FPGA boards in a QMTech board form factor
  ☆18Updated 2 years ago
• hansfbaier / ch569-usb3-board
  USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569
  ☆26Updated 2 years ago
• smunaut / iua
  ice40 USB Analyzer
  ☆58Updated 4 years ago
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆28Updated 9 months ago
• ulixxe / usb_dfu
  Full Speed USB DFU interface for FPGA and ASIC designs
  ☆17Updated last year
• micro-FPGA / CRUVI
  CRUVI Standard Specifications
  ☆18Updated 11 months ago
• enjoy-digital / litex_rp2040_pmod_test
  Test of a RP2040 PMOD attached to a LiteX SoC.
  ☆25Updated last year
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated 9 months ago
• controlpaths / litefury_rp5
  Conecting the Litefury FPGA accelerator to Raspberry Pi 5 over PCIe gen2 x1
  ☆28Updated last year
• icebreaker-fpga / icebreaker-v2-usb-firmware
  Firmware to implement USB communications on the CH32V307 microcontroller
  ☆11Updated 2 years ago
• rprinz08 / arty-s7-multinic
  ArtyS7-50 VexRiscV LiteX SoC using multiple Ethernet Interface
  ☆13Updated 4 years ago
• lambdaconcept / amaranth-to-litex
  Use amaranth-to-litex to simply import Amaranth code into a Litex project.
  ☆13Updated 11 months ago
• meriac / OpenXC7-LiteX
  Container for compiling LiteX HDL FPGA designs using the free OpenXC7 tool chain and GitHub code spaces
  ☆25Updated last year
• hamsternz / MMCM_GPSDO
  An all-digital GPS disciplined oscillator using MMCM phase shift.
  ☆28Updated 2 years ago
• j-marjanovic / ocs-tray-mezzanine-adapter
  PCIe adapter for an FPGA accelerator for Open CloudServer
  ☆23Updated 4 years ago
• mithro / valentyusb
  USB Full-Speed core written in migen/LiteX
  ☆17Updated 5 years ago
• mkvenkit / humble_ice
  A low cost FPGA development board based on Lattice iCE40UP5k and Raspberry Pi RP2040.
  ☆42Updated 2 years ago
• pergola-fpga / pergola
  Low-cost ECP5 FPGA development board
  ☆77Updated 4 years ago
• enjoy-digital / litex-acorn-baseboard
  LiteX development baseboards arround the SQRL Acorn.
  ☆61Updated 3 weeks ago
• lawrie / ulx3s_bit_streams
  Bit streams forthe Ulx3s ECP5 device
  ☆16Updated 2 years ago
• hydrausb3 / wch-ch569-serdes
  WCH CH569 SerDes Reverse Engineering
  ☆26Updated 2 years ago
• greatscottgadgets / luna-soc
  Amaranth HDL libary for building USB-capable SoC designs.
  ☆21Updated last week
• controlpaths / cp_som_one
  Artix7 SOM
  ☆17Updated 7 months ago
• openXC7 / xc7k325t-blinky-nextpnr
  ☆45Updated 2 years ago
• tomverbeure / ecp5_jtag
  Use ECP5 JTAG port to interact with user design
  ☆26Updated 3 years ago
• ECP5-PCIe / ECP5-Utils
  Utilities for the ECP5 FPGA
  ☆18Updated 3 years ago
• quartiq / bscan_spi_bitstreams
  FPGA gateware and pre-build bitstreams that expose SPI over JTAG. The protocol is implemented (among others) by openocd.
  ☆53Updated 2 years ago