hydrausb3 / hydrausb3_fw
HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3 SS, HSPI, SerDes...)
☆78Updated last year
Alternatives and similar repositories for hydrausb3_fw:
Users that are interested in hydrausb3_fw are comparing it to the libraries listed below
- HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, …☆32Updated last year
- SDK sch&layout reference design and datasheet documention☆57Updated 11 months ago
- ECP5 FPGA in an "S7 Mini" form factor☆79Updated 3 years ago
- WCH CH569 SerDes Reverse Engineering☆26Updated 2 years ago
- ☆23Updated 4 years ago
- microcontroller-based FPGA / JTAG programmer☆69Updated last month
- WCH CH56x BSP for HydraUSB3 v1 hardware☆16Updated 10 months ago
- Siglent SDS1x0xX-E FPGA bitstreams☆40Updated last month
- Low-cost ECP5 FPGA development board☆77Updated 4 years ago
- Reverse Engineering of the Cisco HWIC-3G-CDMA PCB☆40Updated 10 months ago
- Gateware to communicate with the high speed parallel interface (HSPI) of the CH569 with a FPGA☆29Updated 2 years ago
- Tiny tips for Colorlight i5 FPGA board☆56Updated 3 years ago
- USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569☆25Updated 2 years ago
- ice40 USB Analyzer☆57Updated 4 years ago
- Gateware for USB2Sniffer☆25Updated 3 years ago
- Digilent JTAG clone hardware + eeprom firmware (.bin)☆61Updated 2 years ago
- Esden style kicad libraries.☆60Updated last week
- ☆82Updated 4 months ago
- Various JTAG boundary scan tools☆34Updated 4 years ago
- Opensource embedded controller firmware for sipeed boards.☆33Updated 5 years ago
- USB-JTAG Adapter Using CH552☆67Updated 3 years ago
- It started as some general experiments with RF stuff and gradually evolved into a (severely limited) spectrum analyzer.☆38Updated 5 years ago
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆52Updated 2 years ago
- RP2040 MCU based PMOD☆20Updated 2 months ago
- Test of a RP2040 PMOD attached to a LiteX SoC.☆25Updated last year
- Farpatch debugger software layer, backed by Black Magic☆47Updated 2 weeks ago
- ☆51Updated last year
- ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.☆60Updated last year
- LiteX based FPGA gateware for Thunderscope.☆23Updated 11 months ago
- FPGA gateware and pre-build bitstreams that expose SPI over JTAG. The protocol is implemented (among others) by openocd.☆53Updated last year