EEVengers / TS.NET
☆19Updated this week
Alternatives and similar repositories for TS.NET:
Users that are interested in TS.NET are comparing it to the libraries listed below
- Links to application notes published by electronics manufacturers.☆42Updated 6 years ago
- LiteX based FPGA gateware for Thunderscope.☆23Updated 11 months ago
- GitHub Repository for iotSDR open source material☆33Updated 10 months ago
- ☆31Updated last week
- Read TouchStone files (S-Parameters) and plot them. Also calibrate them using Short-Open-Load / Through-Isolation calibration files☆14Updated 7 years ago
- This Repo has Files related to reverse engineering of IBM 98Y2610 Intel Cyclone IV☆56Updated last month
- Siglent SDS1x0xX-E FPGA bitstreams☆40Updated 3 weeks ago
- WCH CH569 SerDes Reverse Engineering☆26Updated 2 years ago
- Couple of scripts which checks length matching of your KiCad design.☆26Updated 8 years ago
- Prototype time domain reflectometer/sampling oscilloscope☆50Updated 5 years ago
- LimeSDR XTRX gateware project.☆16Updated this week
- RF Signal Generator with filtered outputs, modulation features☆12Updated 4 years ago
- WCH CH56x BSP for HydraUSB3 v1 hardware☆16Updated 10 months ago
- Combined ESP32C3 and iCE40 FPGA board☆63Updated 2 weeks ago
- GPS Disciplined Oscillator for high-precision timekeeping. More accurate than my Rubidium-based atomic clock.☆22Updated 5 years ago
- 2GHz single-ended active probe design☆116Updated 6 months ago
- An SDR for Raspberry Pi☆34Updated 4 years ago
- Yet Another XC7Z010 Board☆17Updated 2 years ago
- EMC near-field probe designs☆28Updated 3 years ago
- EVEREST: e-Versatile Research Stick for peoples☆35Updated last year
- C# Oscilloscope Library and GUI (tested with Rigol DS1102E)☆36Updated last week
- Over-engineered SDR development board☆36Updated last month
- Debian12 Boot Image (U-boot, Linux Kernel, Debian12 RootFS) for ZYBO/ZYBO-Z7/PYNQ-Z1/DE10-Nano/DE0-Nano-SoC☆12Updated 4 months ago
- HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, …☆32Updated 11 months ago
- Standalone OpenOCD and CMSIS-SVD based peripheral register viewer written on Python☆32Updated 6 years ago
- interfacing a Teensy with a TCD1304 linear CCD☆11Updated 4 years ago
- TinyUSB-based logic analyzer code for Sigrok☆27Updated 3 years ago
- High Speed Data Acquisition over HDMI - FPGA implementation☆35Updated last month
- multi MAX2771 GNSS receiver☆28Updated last week
- BR2_EXTERNAL framework for Analog Device's PlutoSDR Zynq☆36Updated 2 months ago