Alternatives and similar repositories for colorlight-qmtech-adapter

Users that are interested in colorlight-qmtech-adapter are comparing it to the libraries listed below

• no2fpga / no2muacm
  Drop In USB CDC ACM core for iCE40 FPGA
  ☆34Updated 4 years ago
• openXC7 / xc7k325t-blinky-nextpnr
  ☆45Updated 3 years ago
• tomverbeure / ecp5_jtag
  Use ECP5 JTAG port to interact with user design
  ☆33Updated 4 years ago
• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆69Updated this week
• kazkojima / colorlight-i5-tips
  Tiny tips for Colorlight i5 FPGA board
  ☆63Updated 4 years ago
• xobs / lxbuildenv
  Simplified environment for litex
  ☆14Updated 5 years ago
• controlpaths / litefury_rp5
  Conecting the Litefury FPGA accelerator to Raspberry Pi 5 over PCIe gen2 x1
  ☆37Updated last year
• gtjennings1 / HyperBUS
  A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs
  ☆63Updated 7 years ago
• hansfbaier / ch569-usb3-board
  USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569
  ☆27Updated 3 years ago
• lambdaconcept / amaranth-to-litex
  Use amaranth-to-litex to simply import Amaranth code into a Litex project.
  ☆15Updated last year
• hydrausb3 / wch-ch569-serdes
  WCH CH569 SerDes Reverse Engineering
  ☆30Updated 3 years ago
• GMM-7550 / gmm7550-hardware
  CologneChip GateMate FPGA Module: GMM-7550
  ☆28Updated 2 weeks ago
• joshajohnson / ecp5-mini
  ECP5 FPGA in an "S7 Mini" form factor
  ☆89Updated 4 years ago
• no2fpga / no2usb
  Nitro USB FPGA core
  ☆86Updated last year
• lambdaconcept / lambdaUSB
  A configurable USB 2.0 device core
  ☆32Updated 5 years ago
• lawrie / ulx3s_bit_streams
  Bit streams forthe Ulx3s ECP5 device
  ☆18Updated 2 years ago
• ECP5-PCIe / ECP5-Utils
  Utilities for the ECP5 FPGA
  ☆17Updated 4 years ago
• ultraembedded / core_ulpi_wrapper
  ULPI Link Wrapper (USB Phy Interface)
  ☆34Updated 5 years ago
• GuzTech / ulx3s-nmigen-examples
  nMigen examples for the ULX3S board
  ☆16Updated 5 years ago
• ZiyangYE / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆38Updated last year
• mithro / kicad-pmod
  KiCad Library to make it easy to create both host boards and expansion boards and which are compatible with the Digilent "PMOD" specifica…
  ☆42Updated 4 years ago
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆105Updated 5 months ago
• tmeissner / gatemate_experiments
  Experiments with Cologne Chip's GateMate FPGA architecture
  ☆17Updated 2 years ago
• smunaut / iua
  ice40 USB Analyzer
  ☆57Updated 5 years ago
• lambdaconcept / lambdasoc
  ☆44Updated 10 months ago
• HarmonInstruments / verilog
  ☆20Updated 3 years ago
• 360nosc0pe / scope
  Siglent SDS1x0xX-E FPGA bitstreams
  ☆44Updated last year
• mattvenn / logLUTs
  Tool to parse yosys and nextpnr logfiles to then plot LUT, flip-flop and maximum frequency stats as your project progresses.
  ☆22Updated 2 years ago
• emard / esp32ecp5
  micropython ESP32 programmer/flasher for ECP5 JTAG
  ☆74Updated 4 months ago
• enjoy-digital / litex_rp2040_pmod_test
  Test of a RP2040 PMOD attached to a LiteX SoC.
  ☆28Updated 2 years ago