openwch / ch569
SDK sch&layout reference design and datasheet documention
☆60Updated last year
Alternatives and similar repositories for ch569:
Users that are interested in ch569 are comparing it to the libraries listed below
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆54Updated 3 years ago
- Gateware to communicate with the high speed parallel interface (HSPI) of the CH569 with a FPGA☆31Updated 2 years ago
- USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569☆26Updated 2 years ago
- USB-Blaster instance on CH55x MCU.☆48Updated 5 years ago
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆45Updated 4 years ago
- Load bitstream to AG1K series FPGA using CH552☆12Updated 3 years ago
- WCH CH569 SerDes Reverse Engineering☆26Updated 2 years ago
- USB-JTAG Adapter Using CH552☆67Updated 3 years ago
- Track Length Calculator☆24Updated 11 months ago
- Altera "USB_Blaster" clone using Teensy 3.5 microcontroller☆19Updated 4 years ago
- ECP5 FPGA in an "S7 Mini" form factor☆79Updated 3 years ago
- ESP8266 Xilinx Virtual Cable - wifi JTAG☆39Updated 3 years ago
- AGM bitstream utilities and decoded files from Supra☆42Updated last year
- Opensource embedded controller firmware for sipeed boards.☆36Updated 6 years ago
- Tiny tips for Colorlight i5 FPGA board☆56Updated 4 years ago
- Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x☆108Updated last year
- HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…☆78Updated last year
- fpga co-processor for faster SWD programming☆16Updated 7 years ago
- Digilent JTAG clone hardware + eeprom firmware (.bin)☆62Updated 2 years ago
- usb-jtag - Altera USB Blaster Emulation with a FX2☆70Updated 3 years ago
- ☆24Updated 4 years ago
- 32-bit RISC-V MCU CH32X035 built-in USB PD PHY☆54Updated 2 weeks ago
- ☆45Updated 2 years ago
- A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)☆20Updated 3 years ago
- This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…☆17Updated 2 years ago
- ☆35Updated 2 months ago
- CH552 Dual USB to Serial Bridge.☆77Updated 7 months ago
- Blob-free logic analyzer firmware for FX3☆77Updated last year
- CH55x USB to JTAG bridge☆130Updated 3 weeks ago
- Port of https://github.com/eleqian/WiDSO/tree/master/MCU/USB-Blaster to GCC and "traditional" STM32F103C8T6 Bluepill board.☆43Updated 6 years ago