damienmaguire / Tesla-Gen3-Charger
Reverse Engineering of the Tesla Gen3 charger and development of an open source control board
☆14Updated 3 years ago
Alternatives and similar repositories for Tesla-Gen3-Charger:
Users that are interested in Tesla-Gen3-Charger are comparing it to the libraries listed below
- Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU☆20Updated 3 years ago
- Reverse Engineering of the Tesla Model 3 charger and development of an open source control board☆27Updated 3 months ago
- Tesla ChargePort SWCAN Decoder☆13Updated 4 years ago
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated last year
- CAN BUS Man In The Middle for spying on and modifyling automotive can traffic on the fly.☆28Updated 4 years ago
- Tesla Model S/3/X CAN Bus Inspector (.NET Core 3.0)☆13Updated 2 years ago
- Reverse engineering of the Tesla Model 3 battery bms control☆55Updated last year
- SIMPBMS code for I3 Modules☆42Updated last year
- C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs☆11Updated 10 years ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.☆49Updated this week
- BMW E46 related files☆18Updated 5 years ago
- Arduino firmware for Macchina M2 and SuperB for the Onyx M2 project, allowing CAN bus messages to flow to a web app running on the Tesla …☆12Updated 3 years ago
- Open Source Logic board to control the Tesla Model S Front Drive Unit☆51Updated 3 years ago
- Tesla Model 3 premium amp reverse engineering☆8Updated last year
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆113Updated 3 years ago
- Firmware signature bypass on the IC204☆25Updated 3 years ago
- Redacted code for Rust-based Charge Port Controller☆11Updated 4 years ago
- Miscellanous code for interacting with car electronics☆46Updated 2 months ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- CAN Bootstrap Loader (BSL) for Tricore AudoMAX (TC1791 and friends), including arbitrary read/write as well as compressed read functional…☆55Updated 2 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated last year
- Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)☆35Updated 6 years ago
- Software for extracting more power from LEAF inverter upgrades. Enables 110kW and 160kW inverters to function with the older LEAF☆65Updated 3 weeks ago
- SWCAN add-on board for Open Vehicle Monitoring System☆29Updated 5 years ago
- BMW CANbus gateway emulator & proxy☆17Updated 4 years ago
- initial release☆17Updated 8 years ago
- ☆17Updated 3 years ago
- ☆40Updated last year
- Use openinverter hardware as an island (non-grid connected) inverter☆15Updated 3 years ago