Alternatives and similar repositories for Open-Vehicle-Monitoring-System

Users that are interested in Open-Vehicle-Monitoring-System are comparing it to the libraries listed below

• collin80 / due_canopen
  CANOpen library for due_can
  ☆11Updated 10 years ago
• autosportlabs / OBD2CAN
  Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.
  ☆44Updated 5 years ago
• collin80 / A0RET
  CANBus reverse engineering firmware for the Macchina A0
  ☆19Updated 11 months ago
• festlv / canbus_logger
  CANBus logger using Arduino + MCP2515 with GUI in Python
  ☆24Updated 13 years ago
• ihaque / arduino-ecu-logger
  Arduino-based OBD2 engine monitor and data logger
  ☆38Updated 9 years ago
• CANBus-Triple / CANBus-Triple-Hardware
  Eagle CAD files for CANBus Triple Hardware
  ☆56Updated 8 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆59Updated 4 years ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆80Updated 5 years ago
• sebi2k1 / openCanSuite
  ☆31Updated 8 years ago
• damienmaguire / Inverter
  My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.
  ☆12Updated 8 years ago
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆33Updated 11 years ago
• BretStateham / arduino-ecu-simulator
  Arduino ECU Simulator
  ☆21Updated 6 years ago
• Metaln00b / NodeMCU-BlackBox
  ESP8266 based CAN-Bus Diagnostic Tool
  ☆43Updated 4 years ago
• dimecho / Open-Inverter-WebInterface
  Open Inverter - Alternative Web Interface
  ☆34Updated 3 years ago
• skpang / Arduino_CAN-Bus_ECU_reader
  ☆50Updated 8 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆102Updated 4 years ago
• LibreSolar / solarduino-li-ion
  Solar charge controller with integrated 12 V Li-Ion BMS
  ☆15Updated 6 years ago
• macchina / Single-Wire-CAN-mcp2515
  Single-wire CAN library powered by https://github.com/macchina/mcp2515
  ☆13Updated 6 years ago
• afterhoursengineering / _CANcrusher_ARM
  Open Source CANbus hacking project.
  ☆14Updated 5 years ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆36Updated 7 months ago
• bouletmarc / Arduino_Honda_OBD1_BM-Duino
  This is an Arduino Honda OBD1 ECU datalogger from CN2, also able to ignition cut
  ☆16Updated 9 years ago
• majbthrd / CANsniffer
  CANbus sniffer using STM32F042 microcontroller
  ☆32Updated 8 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆71Updated 6 years ago
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆30Updated last month
• roboterclubaachen / usb2can
  ☆51Updated 6 years ago
• autowp / CANreader
  Android CAN client
  ☆64Updated 8 years ago
• kkuchera / canalyze-hw
  Hardware for a CAN to USB bridge.
  ☆58Updated 7 years ago
• TUMFTM / uds-decoder
  UDS Decoder zur vereinfachten Umrechnung von Diagnoseabfragen
  ☆18Updated 2 years ago
• sparkfun / OBD-II_UART
  A board that provides a serial interface with a vehicle's OBD-II bus.
  ☆86Updated 5 years ago
• DieselDuz42 / Arduino-CAN-bus-SD-logger
  Arduino script to log CAN bus information to SD card. Mainly focused on J1939.
  ☆25Updated 5 years ago