damienmaguire / Prius-Gen3-InverterLinks
Open source logic board to control the Toyota Prius Gen 3 Inverter
☆50Updated 3 years ago
Alternatives and similar repositories for Prius-Gen3-Inverter
Users that are interested in Prius-Gen3-Inverter are comparing it to the libraries listed below
Sorting:
- Eagle schematics of inverter main board, sensor boards and gate drivers☆71Updated 3 years ago
- Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.☆63Updated last week
- Open Source logic board for the Tesla Model S large rear drive unit. PCB Files in DesignSpark 8 format.☆92Updated 4 years ago
- Generalized Electric Vehicle Control Unit☆118Updated 3 years ago
- ARCHIVE: Lebowski controller IC 2.A1 source code and (short) explanation☆18Updated 5 years ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- Open Inverter - Alternative Web Interface☆32Updated 3 years ago
- Prius Gen 3 buck/boost converter charger controller - buck mode charging☆14Updated 5 years ago
- TO247 half bridge module for EVs☆16Updated 6 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆61Updated 4 years ago
- Use openinverter hardware as an island (non-grid connected) inverter☆16Updated 4 years ago
- Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards☆101Updated 6 years ago
- Open Source Logic board to control the Tesla Model S Front Drive Unit☆51Updated 3 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆71Updated 6 years ago
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆47Updated last year
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆121Updated 4 years ago
- This is an Arduino library providing an emulation of the CAN communication protocol of the BMS (battery management system) on a Renault T…☆86Updated 2 years ago
- Repurposes the openinverter main board as a buck or boost mode charger☆15Updated last year
- Generalized Vehicle Control Unit for version 6 boards☆25Updated last year
- Isolated current, voltage and SOC monitor for battery banks up to 85V☆54Updated 2 years ago
- ☆10Updated 2 years ago
- This is the software for running an AC INDUCTION OR PERMANENT MAGNET motor with field oriented control.☆52Updated 8 years ago
- CAN Bus Bridge / Smart Repeater☆37Updated 4 months ago
- My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.☆12Updated 8 years ago
- An open hardware platform for experimenting with DC-to-AC conversion, power and energy metering and grid tie inverters.☆70Updated last year
- ☆63Updated 3 years ago
- Multi-Platform, Modular, Powerful ESC☆119Updated last year
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆61Updated 3 months ago
- Main firmware of the Huebner inverter project☆175Updated last month
- Simple IGBT based controller for DC motors used in Electric Vehicles. Files in DesignSpark 8 format☆32Updated 6 years ago