qca / qca7000Links
UART/SPI drivers for Qualcomm Atheros QCA7000 serial-to-powerline bridge chip. This version is specific to Linux 2.6.35 and Freescale iMX28 CPU.
☆62Updated 12 years ago
Alternatives and similar repositories for qca7000
Users that are interested in qca7000 are comparing it to the libraries listed below
Sorting:
- The main files for the car charging station project☆38Updated 8 years ago
- An open source project implementing the basic functionality of the ISO IEC 15118 and also the DIN 70121 vehicle to grid (V2G) communicati…☆112Updated last month
- Simple ISO15118-3 SLAC implementation☆18Updated 9 months ago
- ☆11Updated 5 years ago
- ISO15118 part 4(HLC/V2G) conformance test environment☆15Updated 3 years ago
- ☆22Updated 10 years ago
- Open Charge Point Protocol (OCPP 1.6J) client for MCUs with low RAM (AVR/ATMEGA, MCS-51 & etc)☆15Updated 3 years ago
- STM32 firmware for the Yeti power board reference hardware☆20Updated last year
- Dissector for the V2G Protocols☆60Updated last month
- J1939 stack☆53Updated 10 years ago
- V2G (Vehicle-to-Grid) Wireshark LUA dissectors (ISO 15118-2)☆25Updated 4 years ago
- The bootloader used to flash our CAN-connected boards☆149Updated 2 years ago
- Free Wireshark plugin to analyze ISO15118 V2G communication between electric vehicles (EV) and charging stations (EVSE).☆74Updated last week
- An open source project implementing the basic functionality of the ISO IEC 15118 and also the DIN 70121 vehicle to grid (V2G) communicati…☆23Updated 4 years ago
- EDF R&D implementation of ISO 15118-20.☆64Updated 2 years ago
- libcbV2G - The V2GTP EXI codec library☆28Updated 3 weeks ago
- Implementation of the Signal Level Attenuation Characterisation (SLAC) introduced in ISO15118-3☆49Updated 2 years ago
- A universal CAN bus monitoring program☆78Updated 6 years ago
- Unified Diagnostic Services on Controller Area Network☆59Updated 12 years ago
- Implementation of ISO15765-2 in C☆178Updated last year
- Obsolete CAN modules. For ISO 15765-2 development see https://github.com/hartkopp/can-isotp.git☆43Updated 5 years ago
- A C library to control a device via UART that responds to an AT command set (like an RN-42)☆91Updated 11 years ago
- Code implemention of ISO 15765-2 CAN transport layer.☆29Updated 7 years ago
- cbExiGen - The V2GTP EXI codec generator for cbV2G☆56Updated last month
- ISO 15118 library suite☆30Updated 3 weeks ago
- S32K144 NVM Flash Driver For UDS(Unified Diagnostic Services, ISO 14229) ECU Program Update☆84Updated 4 years ago
- Wireshark Plugin for viewing ISO15118 VSE elements in Beacon, Probe requests, and (re)association messages☆22Updated 6 years ago
- V2Gdecoder: encode and decode V2G messages on the fly☆44Updated last week
- oe-manifest☆73Updated 4 months ago
- Running ISO15118-compliant SECC and EVCC over Wireless Communication☆20Updated 6 years ago