pulsatrix-emobility / CP-PP-miniEVsimulatorLinks
A small PBC to simulate the CP and PP signals of an electric vehicle (EV)
☆12Updated 3 years ago
Alternatives and similar repositories for CP-PP-miniEVsimulator
Users that are interested in CP-PP-miniEVsimulator are comparing it to the libraries listed below
Sorting:
- STM32 with QCA7005 as CCS charge controller☆82Updated last week
- ESP32 Based Chademo implementation☆16Updated 10 months ago
- ESP32 talks via SPI with QCA7005 PLC modem☆22Updated last year
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆79Updated last month
- Collection of CAN logs from different electric vehicles☆33Updated 10 months ago
- Firmware for IEC61851/J1772 Vehicle Charge Port (Vehicle Side) & EVSE (Supply Side)☆20Updated 2 years ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆15Updated last year
- QCA7000 PLC Board☆13Updated 3 years ago
- Software for Damien Maguire's CHAdeMO controller☆21Updated 4 years ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆43Updated 4 years ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- Electric Vehicle AC Charger Controller☆12Updated 5 years ago
- Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70…☆60Updated 8 months ago
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆27Updated last year
- The devolo dLAN Green PHY module is ideal for installation in all IoT-devices. Includes QCA7000 chipset and LPC1758 host processor.☆7Updated 9 months ago
- Wireshark Plugin for viewing ISO15118 VSE elements in Beacon, Probe requests, and (re)association messages☆21Updated 5 years ago
- a ESP32-S3 talks to a QCA7005 to read the SOC of a car☆23Updated last year
- reverse engineering of Hyundai Ioniq (classic, production 2018)☆19Updated this week
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆20Updated 4 years ago
- BelayBox reference hardware☆55Updated 10 months ago
- Implementation of the Signal Level Attenuation Characterisation (SLAC) introduced in ISO15118-3☆45Updated last year
- Electric vehicle CCS charging investigations with Python☆187Updated last month
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆61Updated 4 years ago
- ☆22Updated 10 years ago
- Provide LIN-Master functions (write and request LIN-Frames via hardware UART☆38Updated 9 months ago
- V2G (Vehicle-to-Grid) Wireshark LUA dissectors (ISO 15118-2)☆23Updated 3 years ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated 2 years ago
- ☆17Updated 3 months ago
- CANbus to http bridge using esp32☆44Updated this week
- Dissector for the V2G Protocols☆54Updated 9 months ago