dalathegreat / leaf_can_bus_messagesLinks
LEAF CAN bus message decoding with proper database files
☆206Updated 5 months ago
Alternatives and similar repositories for leaf_can_bus_messages
Users that are interested in leaf_can_bus_messages are comparing it to the libraries listed below
Sorting:
- An opensource solution for connecting OBD2 straight to the Nissan Leaf battery☆63Updated last year
- Software for extracting more power from LEAF inverter upgrades. Enables 110kW and 160kW inverters to function with the older LEAF☆75Updated 8 months ago
- Collection of CAN logs from different electric vehicles☆37Updated last year
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆47Updated last year
- Software for correcting instrumentation on a battery "bruteforce" upgraded LEAF☆22Updated 5 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆61Updated 4 years ago
- USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield☆138Updated 3 years ago
- Information for how to add CCS to your LEAF, keeping it relevant for many years to come!☆79Updated 2 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆84Updated 4 months ago
- SIMPBMS code for I3 Modules☆46Updated 2 years ago
- SimpBMS Documentation☆89Updated 3 years ago
- Volvo LIN bus reader☆95Updated 4 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆20Updated last week
- Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. C…☆325Updated last year
- Open source project for W211/W219 W203/W209 Mercs - bluetooth audio control and more!☆148Updated 5 years ago
- ☆44Updated 3 years ago
- BMW E-series dbc☆76Updated last month
- Information on using the Chevy Volt / Opel Ampera Battery BMS☆19Updated last year
- leaf spline revers engineering☆14Updated 5 years ago
- Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards☆105Updated 6 years ago
- Open Vehicle Monitoring System - Version 3☆719Updated this week
- An open source TCM for Daimlers 722.6 gearbox. Resource repository☆116Updated 11 months ago
- CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)☆322Updated 8 months ago
- Tips and tricks on repairing the fragile ZE0 LEAF PTC heater☆11Updated 3 years ago
- Redacted code for Rust-based Charge Port Controller☆11Updated 4 years ago
- Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.☆114Updated 3 years ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated 2 years ago
- ☆19Updated 6 months ago
- ☆25Updated 10 years ago
- Setting up Torque Pro to show OBD data on Hyundai / Kia Electric Vehicles☆253Updated 4 years ago