jsphuebner / bms-hardware
Hardware design files for Lithium BMS
☆13Updated 3 years ago
Alternatives and similar repositories for bms-hardware:
Users that are interested in bms-hardware are comparing it to the libraries listed below
- ☆10Updated last year
- ☆23Updated 6 years ago
- My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.☆11Updated 7 years ago
- Open Inverter - Alternative Web Interface☆31Updated 3 years ago
- Eagle schematics of inverter main board, sensor boards and gate drivers☆64Updated 2 years ago
- These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.☆24Updated 2 weeks ago
- ISL94202 & MSP430 based BMS☆42Updated 4 years ago
- Use openinverter hardware as an island (non-grid connected) inverter☆16Updated 4 years ago
- Generalized Vehicle Control Unit for version 6 boards☆25Updated 10 months ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated 2 years ago
- Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU☆20Updated 3 years ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆20Updated 3 years ago
- Repurposes the openinverter main board as a buck or boost mode charger☆16Updated last year
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆61Updated 4 years ago
- 7th generation GEVCU source code☆22Updated this week
- 5000kV Isolator for USB 2.0 Full Speed☆12Updated 4 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆56Updated last week
- A Space Vector Modulation (SVM) simulator for FOC analysis☆15Updated 6 years ago
- Generalized Electric Vehicle Control Unit☆116Updated 2 years ago
- Solar charge controller with integrated 12 V Li-Ion BMS☆15Updated 6 years ago
- Ethernet-CAN converter board based on STM32F407☆24Updated 2 years ago
- This is the bootloader firmware portion of my DieBieMS battery management system.☆22Updated 6 years ago
- 3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.☆19Updated 6 years ago
- Arduino Library for CAN Bed☆26Updated 3 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆69Updated 5 years ago
- Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.☆15Updated 2 years ago
- Web interface for Huebner inverter☆34Updated 4 months ago
- Firmware for Battman BMS☆37Updated 7 years ago
- Fully integrated 12V-24V BMS using ISL94202☆32Updated last year