Alternatives and similar repositories for lgresu

Users that are interested in lgresu are comparing it to the libraries listed below

• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆83Updated 3 years ago
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆13Updated 3 weeks ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆84Updated 2 years ago
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆228Updated last month
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆45Updated 4 years ago
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆99Updated last week
• muccc / WomoLIN
  Open Source Steuerung von LIN Bus Geräten im Caravan Bereich.
  ☆83Updated 4 years ago
• openenergymonitor / open_evse
  Firmware for OpenEnergyMonitor OpenEVSE
  ☆18Updated 3 years ago
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆153Updated last month
• M-o-a-T / venusian
  Victron Energy's "venus" – on top of Debian
  ☆35Updated 3 months ago
• Tom-evnut / VEcan
  Communicating with Victron energy products, also compatible with other inverters and solar equipement
  ☆21Updated 8 years ago
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆92Updated 3 years ago
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆198Updated last year
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆208Updated 2 weeks ago
• tgalarneau / bms
  JBD BMS and Thornwave bluetooth data monitoring
  ☆49Updated 4 years ago
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆178Updated 5 months ago
• meteosat007 / solar-pylontech
  How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries
  ☆20Updated 5 years ago
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆145Updated this week
• LHardwick-git / Victron-Service
  Temperature and Humidity d-bus services for Victron GX
  ☆19Updated 3 years ago
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆117Updated last year
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated 2 years ago
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆95Updated 2 weeks ago
• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆33Updated 2 years ago
• mr-manuel / venus-os_dbus-serialbattery
  Battery Monitor driver for serial battery in VenusOS GX systems
  ☆205Updated last week
• SmartEVSE / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆206Updated this week
• nygma2004 / growatt2mqtt
  Growatt Solar Inverter Modbus Data to MQTT Gateway
  ☆178Updated 2 years ago
• jblance / mpp-solar
  Python package to communicate to MPP Solar PIP-4048MS inverters (and similar)
  ☆417Updated last month
• NismoBoy34 / Esp32LeafInverterBridge
  esp32 Based can-bridge with webserver
  ☆19Updated last year
• OpenEVSE / open_evse
  Firmware for Open EVSE
  ☆142Updated this week
• physee / Victron.Arduino-ESP8266
  Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…
  ☆131Updated 4 years ago