Alternatives and similar repositories for DehneEVSE-Firmware

Users that are interested in DehneEVSE-Firmware are comparing it to the libraries listed below

• OpenEVSE / OpenEVSE_PLUS
  OpenEVSE Hardware
  ☆185Updated 3 months ago
• sebdehne / DehneEVSE-Hardware
  DehneEVSE - EV Type 2 Charging station
  ☆15Updated 4 years ago
• OpenEVSE / open_evse
  Firmware for Open EVSE
  ☆131Updated 5 months ago
• MyLab-odyssey / ED_BMSdiag
  Retrieve battery diagnostic data from your smart electric drive EV.
  ☆55Updated 2 years ago
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆87Updated 2 years ago
• dzurikmiroslav / esp32-evse
  ESP32 EVSE firmware
  ☆102Updated this week
• lincomatic / open_evse
  Firmware for Open EVSE
  ☆120Updated last year
• SmartEVSE / SmartEVSE-2
  Smart Electric Vehicle Charging Station (EVSE)
  ☆92Updated 7 months ago
• fotherja / EV_Charger
  Arduino Uno Code for EV Charger
  ☆151Updated last year
• uhi22 / ccs32berta
  ESP32 talks via SPI with QCA7005 PLC modem
  ☆21Updated last year
• gonium / EVSE-Car-Simulator
  A simple car simulator PCB for testing EVSE.
  ☆51Updated 2 years ago
• kortas87 / simple-evse
  Automatically exported from code.google.com/p/simple-evse
  ☆43Updated 10 years ago
• jamiejones85 / ESP32-BMS
  An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.
  ☆15Updated 2 years ago
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆79Updated 3 weeks ago
• OpenEVSE / OpenEVSE_EV_Simulator
  OpenEVSE EV Simulator
  ☆17Updated last year
• tvixen / 4KW-230V-Inverter
  With these schematics and PCB's, it's possible to create a 230V AC 4KW inverter. The main processor is based on Arduino Nano, with help f…
  ☆60Updated 2 years ago
• SmartEVSE / smartevse
  Smart EVSE Electric Vehicle Charging Station
  ☆99Updated 4 years ago
• nsayer / hydra
  J1772 Hydra for Arduino
  ☆16Updated 5 years ago
• SmartEVSE / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆164Updated 2 months ago
• OpenEVSE / DIY_OpenEVSE_PLUS
  Do it Yourself through hole boards
  ☆12Updated 8 years ago
• OpenCleanEnergy / OpenMI
  Open source grid-tied photovoltaic micro-inverter
  ☆47Updated last year
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆33Updated 4 months ago
• stuartpittaway / diyBMS-CurrentShunt
  Isolated current, voltage and SOC monitor for battery banks up to 85V
  ☆53Updated 2 years ago
• silvanverschuur / ev-charger
  EV Charger based on ESP32
  ☆14Updated 3 years ago
• lincomatic / LeafCAN
  SOC Meter for Nissan Leaf - AVR CAN Bus Interface
  ☆43Updated 10 years ago
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆46Updated last year
• OpenEVSE / ESP8266_WiFi_v2.x
  ESP8266 WiFi for OpenEVSE Version 2.x
  ☆78Updated 5 months ago
• uhi22 / ccs32
  WT32-ETH01 with tpLink HomePlug modem as CCS charge controller
  ☆25Updated last year
• Millisman / QCA7000
  QCA7000 PLC Board
  ☆13Updated 3 years ago
• burra / byd_battery
  Try to reverse a BYD battery system
  ☆26Updated 3 years ago