Alternatives and similar repositories for Fred_Inmoov

Users that are interested in Fred_Inmoov are comparing it to the libraries listed below

• MyRobotLab / InMoov
  inmoov repo
  ☆126Updated last year
• Jerome-Graves / yertle
  A 3D Printed Quadrupedal Robot for Locomotion Research.
  ☆130Updated 3 years ago
• ThomasSchnapka / quaro
  Control-software for Quadrupedal Robots, especially for SpotMicro
  ☆20Updated 4 years ago
• MyRobotLab / myrobotlab
  Open Source Java Framework for Robotics and Creative Machine Control
  ☆251Updated 3 months ago
• XRobots / openDogV3
  ☆456Updated 2 years ago
• aaedmusa / TOPS
  TOPS (Traverser of Planar Surfaces) or "SPOT" backwards is a 3D printed Open Source quadrupedal robot
  ☆285Updated 2 years ago
• aaedmusa / 3D-Printed-Robot-Dog
  This is a 12 DOF 3D printed quadrupedal robot that I designed. It uses 12 servo motors, a Polulu maestro servo controller, and a Teensy 4…
  ☆88Updated 2 years ago
• michaelkubina / SpotMicroESP32
  My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…
  ☆371Updated last year
• aaedmusa / OpenQDD-V1
  Open source 3D printed Robotic Actuator
  ☆102Updated 2 years ago
• XRobots / GEDroid
  ☆56Updated last year
• alansrobotlab / inmoov_ros
  Alan's ROS repo for InMoov Grey
  ☆45Updated 7 years ago
• Cyber-One / SpotMicro_MRL
  A very small clone of the Boston Dynamics Spot robot using a Raspberry Pi with the MyRobotLab system installed.
  ☆39Updated 9 months ago
• maartenweyn / SpotMicro_ESP32
  ☆43Updated 5 years ago
• 4ndreas / Mantis-Robot-Arm
  3d printable Robot arm
  ☆43Updated 8 years ago
• thomashiemstra / fred
  This my 3d printed robot arm project
  ☆108Updated last month
• NimbRo / nimbro-op2
  2017 NimbRo-OP2 hardware release
  ☆59Updated 7 years ago
• Arctos-Robotics / ROS
  ROS files for Arctos 3D printed robotic arm
  ☆90Updated last year
• hdumcke / minipupper_kinematics
  ☆20Updated 3 years ago
• cguweb-com / Arduino-Projects
  ☆151Updated last year
• XRobots / miniDogV2
  miniDog V2 CAD and Code
  ☆63Updated 5 years ago
• makerforgetech / modular-biped
  An open source framework for creating a bipedal modular companion robot.
  ☆452Updated 2 weeks ago
• jesseweisberg / moveo_ros
  ROS packages and Arduino scripts that can be used to control the BCN3D Moveo robotic arm in simulation and real-life.
  ☆322Updated 2 years ago
• hansonrobotics / Anthropomorphic-Robot-Hand
  Anthropomorphic Robot Hand and Arm CAD Model
  ☆81Updated 7 years ago
• roTechnic / Cheats6DOFInverseKinematics
  Using IKPY to do Inverse kinematics for a 6DOF arm
  ☆46Updated 3 years ago
• 4ndreas / BetaBots-Robot-Arm-Project
  3d printable Robot arm
  ☆381Updated 4 years ago
• adham-elarabawy / open-quadruped
  An open-source 3D-printed quadrupedal robot. Intuitive gait generation through 12-DOF Bezier Curves. Full 6-axis body pose manipulation. …
  ☆453Updated last year
• alexandrospetkos / quad
  Four Legged robot design
  ☆93Updated 2 years ago
• will-cogley / NM-bionic-hand
  ☆349Updated 5 years ago
• MyRobotLab / InMoov2
  ☆33Updated 3 months ago
• raspibotics / MABEL
  MABEL is a feature-packed, open-source, legged balancing robot based off of the Boston Dynamics Handle robot.
  ☆182Updated 5 years ago