Alternatives and similar repositories for Mantis-Robot-Arm

Users that are interested in Mantis-Robot-Arm are comparing it to the libraries listed below

• 4ndreas / BetaBots-Robot-Arm-Project
  3d printable Robot arm
  ☆358Updated 3 years ago
• bikerglen / robot-arm-v01
  ☆58Updated 7 years ago
• Chris-Annin / Annin-Robot-Project
  6 axis stepper motor robot
  ☆111Updated 7 years ago
• uStepper / uStepper
  Repository for uStepper
  ☆99Updated 5 years ago
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆68Updated 4 years ago
• neuroprod / ClosedLoopDriver
  Arduino controler for a closed-loop stepper motor
  ☆88Updated 10 years ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆91Updated 7 years ago
• 4ndreas / MantisRover
  CAD files for the Mantis Rover Project - 3D printed mecanum wheel rover.
  ☆16Updated 6 years ago
• BCN3D / BCN3DSigma-Mechanics
  All the mechanics of the BCN3D Sigma 3D Printer.
  ☆102Updated 7 years ago
• NiryoRobotics / niryo_stepper
  ☆50Updated 6 years ago
• Toglefritz / Bertram_Robot_Arm
  This repository contains the bill of materials, design files, and firmware for building a giant 3D printed robot arm.
  ☆69Updated 6 years ago
• meisben / easyEEZYbotARM
  A python and arduino control library for the EEZYbotARM 3d printed robot arm (Includes 3-D kinematics for Mk1 and Mk2)
  ☆93Updated last year
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 5 years ago
• isaac879 / Delta-Robot
  This repository is for my 3D printed delta robot controlled by an Arduino Nano.
  ☆46Updated 5 years ago
• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆79Updated 11 months ago
• AngelLM / Asgard
  GUI for Thor developed using PyQt5
  ☆25Updated 3 years ago
• jochenalt / Walter
  6DOF Industrial Robot, vintage style
  ☆146Updated 8 years ago
• hobofan / collected-robotic-arms
  Collection of Robotic Arms and related resources
  ☆142Updated last year
• ftobler / robotArm
  Software for a 3D Printed Robot Arm
  ☆132Updated 5 years ago
• maxosprojects / dobot-arm-CAD
  dobot-arm CAD files
  ☆65Updated 9 years ago
• JoLamMaker / ThisArm_Firmware
  G-code enabled firmware for Robot Arms
  ☆33Updated 3 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 8 years ago
• BCN3D / BCN3DSigma-Electronics
  6 Axis Open Source Electronics for BCN3D Sigma 3D Printer.
  ☆53Updated 3 years ago
• jjrobots / B-ROBOT_EVO2
  New and improved version of our Balancing Robot B-ROBOT
  ☆85Updated 7 years ago
• dsuarezv / GearSolver
  A cycloid gear graphical calculator to design cycloidal drives.
  ☆119Updated 3 years ago
• villamany / 3dpBurner-Image2Gcode
  3dpBurner Image2Gcode. A Image to GCODE converter for GRBL based devices
  ☆56Updated 5 years ago
• glumb / mrc
  MicroPede robot controller 🤖🖥👾
  ☆100Updated 5 years ago
• XRobots / CycloidalDrive
  ☆195Updated last year
• chilipeppr / robot-actuator-esp32-v8
  This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.
  ☆228Updated 4 years ago
• NiryoRobotics / niryo_one
  ☆382Updated 4 years ago