SmartEVSE / ESP32-PLCLinks
a ESP32-S3 talks to a QCA7005 to read the SOC of a car
☆27Updated 2 years ago
Alternatives and similar repositories for ESP32-PLC
Users that are interested in ESP32-PLC are comparing it to the libraries listed below
Sorting:
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆31Updated 2 years ago
- ESP32 talks via SPI with QCA7005 PLC modem☆26Updated 2 years ago
- ESP32 EVSE firmware☆118Updated last month
- Simple ESP32 firmware for Type2 BEV charging☆19Updated 3 years ago
- QCA7000 PLC Board☆14Updated 3 years ago
- Electric vehicle CCS charging investigations with Python☆212Updated 2 months ago
- Implementation of the Signal Level Attenuation Characterisation (SLAC) introduced in ISO15118-3☆49Updated 2 years ago
- Smart Electric Vehicle Charging Station (EVSE)☆198Updated this week
- ☆11Updated last year
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆93Updated 7 months ago
- Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70…☆65Updated last year
- STM32 with QCA7005 as CCS charge controller☆96Updated 4 months ago
- BelayBox reference hardware☆59Updated last year
- A small PBC to simulate the CP and PP signals of an electric vehicle (EV)☆13Updated 4 years ago
- Smart EVSE Electric Vehicle Charging Station☆99Updated 4 years ago
- Smart Electric Vehicle Charging Station (EVSE)☆98Updated 4 months ago
- Fork from the Martin-P/OpenV2G with the goal to provide an universal command line interface. This is used in the python part of the CCS p…☆15Updated last year
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆45Updated 4 years ago
- Arduino firmware for DehneEVSE charging station☆60Updated 3 years ago
- CANbus to mqtt bridge using esp32☆50Updated 3 weeks ago
- OpenEVSE Hardware☆201Updated 9 months ago
- OpenEVSE V4 WiFi gateway using ESP32☆210Updated last week
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.☆36Updated 10 months ago
- ☆147Updated 2 months ago
- Charging Station firmware for electric vehicles - OCPP 2.0.1. compliant☆22Updated 3 years ago
- Smarthome backend☆11Updated last month
- Simple ISO15118-3 SLAC implementation☆18Updated 10 months ago
- Implementation of the ISO 15118 Communication Protocol (-2, -20, -8)☆232Updated 3 months ago
- The only fully-featured reference implementation of the Vehicle-2-Grid communication interface ISO 15118☆248Updated 2 weeks ago
- SimpBMS Documentation☆91Updated 3 years ago