openwch / ch34xLinks
CH340, CH343, CH342, CH344,CH348
☆36Updated 2 years ago
Alternatives and similar repositories for ch34x
Users that are interested in ch34x are comparing it to the libraries listed below
Sorting:
- CH551 to CH554 One Click SDCC Compiler☆24Updated 4 years ago
- WCH-LinkW is a wired/wireless 2.4G dual imitation real debugger, which can be used for online debugging and downloading of WCH RISC-V a…☆26Updated 2 years ago
- simple and cheap 16 channel logic analyzer based on Cypress CY7C68013A development board☆37Updated 5 years ago
- USB Sink based around the STUSB4500☆27Updated 4 years ago
- eMMC WFBGA153 to microSD card adapter PCB☆69Updated last year
- ☆72Updated 3 years ago
- 8051 microcontroller☆40Updated 8 years ago
- CMSIS-DAP compliant debugging probe with SWD, JTAG, and VCP support☆38Updated 6 months ago
- WeAct_HID_Bootloader_F4x1 base on STM32_HID_Bootloader☆43Updated 5 years ago
- USB-PD charger as a programmable power supply.☆72Updated 4 years ago
- ☆34Updated 2 years ago
- CMSIS-DAP compliant SWD Programmer☆27Updated last year
- HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…☆85Updated 2 years ago
- ☆37Updated 5 months ago
- STM32H7B0VBT6 Core Board 280Mhz,128KB ROM,1.4M SRAM☆17Updated 3 years ago
- Deprecated, use 'wlink' instead. Command line tool to switch WCH-LinkE modes between DAP and RV from host.☆10Updated last year
- ICN6211 Configurator☆41Updated 5 years ago
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆48Updated 4 years ago
- Development board for ESP32-P4 Dual core RISCV processor from Espressif☆35Updated last month
- L2 R6: WCH 120MHz RISC-V3A USB3.0 SoC (CH569)☆16Updated 2 years ago
- Opensource toolchain for BL602/BL604, BL702/BL704/BL706, BL616/BL618, BL808 and other series of RISC-V based chips from Bouffalo Lab☆26Updated last year
- ☆33Updated last year
- Arduino core for the BouffaloLab chips☆30Updated 2 years ago
- Opensource embedded controller firmware for sipeed boards.☆44Updated 6 years ago
- CubeTouch Docs☆14Updated last year
- Raspberry pico / RP2040 based USB to I3C converter with Python support☆74Updated last month
- USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware☆31Updated 5 years ago
- ☆28Updated 5 years ago
- Generate Pinout Datasheet in SVG format, from a CSV source file of pin defintions☆69Updated 3 years ago
- Resources for MightyWatt R3 electronic load☆31Updated 2 months ago