uhi22 / IoniqMotorCANLinks
CAN bus node for Hyundai Ioniq motor CAN
☆11Updated 2 years ago
Alternatives and similar repositories for IoniqMotorCAN
Users that are interested in IoniqMotorCAN are comparing it to the libraries listed below
Sorting:
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆13Updated 2 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆61Updated 4 years ago
- ☆20Updated 7 months ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- Collection of CAN logs from different electric vehicles☆37Updated 3 weeks ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated 2 years ago
- leaf spline revers engineering☆14Updated 5 years ago
- ☆10Updated 2 years ago
- reverse engineering of Hyundai Ioniq (classic, production 2018)☆20Updated last week
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆48Updated last year
- ☆44Updated 3 years ago
- Empty Openinverter project to start your own☆15Updated last year
- Software for Damien Maguire's CHAdeMO controller☆23Updated 5 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆61Updated 7 months ago
- CAN Bus Bridge / Smart Repeater☆36Updated 7 months ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆20Updated 3 months ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆88Updated 5 months ago
- Eagle schematics of inverter main board, sensor boards and gate drivers☆74Updated 3 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆16Updated 2 years ago
- Web interface for Huebner inverter☆36Updated last year
- BMW CANbus gateway emulator & proxy☆21Updated 5 years ago
- CAN Reverse engineering tool for ESP32-S3 based boards☆14Updated last year
- ESP32-IDF based BLE<->ISO-TP bridge targeting Macchina A0 hardware☆39Updated 3 years ago
- Tips and tricks on repairing the fragile ZE0 LEAF PTC heater☆11Updated 3 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆23Updated last month
- C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs☆12Updated 11 years ago
- Open Inverter - Alternative Web Interface☆34Updated 3 years ago
- Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU☆22Updated 4 years ago
- Redacted code for Rust-based Charge Port Controller☆11Updated 4 years ago
- VAGCANLOGGER - KW1281 & VW TP 2.0☆33Updated 11 years ago