Alternatives and similar repositories for u-blox-gnss-receiver

Users that are interested in u-blox-gnss-receiver are comparing it to the libraries listed below

• oscimp / PlutoSDR
  BR2_EXTERNAL framework for Analog Device's PlutoSDR Zynq
  ☆46Updated 11 months ago
• darkstar007 / GroundStation
  Python/Qt4/GnuRadio suite for receiving satellites.
  ☆14Updated 7 years ago
• myriadrf / reference-development-kit
  The Myriad-RF Reference Hardware design files and firmware
  ☆48Updated 3 years ago
• xtrx-sdr / images
  Pre-built XTRX packages and firmware images
  ☆43Updated 3 years ago
• swkrueger / Thrifty
  Thrifty is proof-of-concept SDR software for TDOA positioning using inexpensive SDR hardware such as the RTL-SDR.
  ☆71Updated 6 years ago
• ghostop14 / gr-mesa
  Collection of Advanced GNURadio Processing Blocks - Autodoppler, input selection, and signal detection
  ☆41Updated 3 years ago
• bastibl / android-wlan
  WLAN Receiver for GNU Radio on Android
  ☆13Updated 5 years ago
• myriadrf / LimeSDR-USB_FX3
  Cypress FX3 firmware for the USB 3.0 LimeSDR board
  ☆67Updated 3 years ago
• iliasam / STM32F4_SDR_GPS
  STM32 based SDR GPS receiver
  ☆82Updated 6 months ago
• jmfriedt / max2771_fx2lp
  multi MAX2771 GNSS receiver
  ☆44Updated last month
• luigifcruz / CyberRadio
  📻 An SDR Based FM/AM Radio For Desktop. Accelerated with #cuSignal and Numba.
  ☆200Updated 3 years ago
• luigifcruz / PyRadio
  🤓 Python Scripts for WBFM and AM demodulation. Accelerated with #cuSignal and Numba.
  ☆41Updated 3 years ago
• luigifcruz / radio-core
  📔 Python based DSP for CyberRadio and PyRadio. Accelerated with #cuSignal and Numba.
  ☆57Updated 3 years ago
• opencpi / opencpi
  Open Component Portability Infrastructure
  ☆62Updated 4 years ago
• space-physics / piradar
  Radar using Red Pitaya for RF: using Raspberry Pi 3 for quad-core radar signal processing
  ☆74Updated 4 years ago
• myriadrf / libfreesrp
  Small C++ library to interface with the FreeSRP
  ☆58Updated 3 years ago
• NTIA / scos-sensor
  NTIA/ITS Spectrum Monitoring SCOS sensor reference implementation
  ☆21Updated 5 months ago
• CGrassin / EMI_mapper
  A python script using RTL-SDR and OpenCV to create fast 2D electromagnetic maps.
  ☆125Updated 4 years ago
• sp5wwp / M17_ANL
  A radio modem based on SiLabs Si4463 - "M17 analyser"
  ☆16Updated 5 years ago
• Opendigitalradio / lea-m8f-board
  A USRP B200 compatible GPSDO board with the u-blox LEA-M8F
  ☆16Updated 9 years ago
• ghostop14 / gr-grnet
  GNURadio TCP/UDP source and sink blocks rewritten in C++/Boost. UDP block has header/crc options available as well.
  ☆38Updated 2 years ago
• swkrueger / corx
  Proof-of-concept software for a low-cost correlated antenna array using inexpensive RTL-SDR dongles and single-board computers
  ☆14Updated 8 years ago
• gasparka / LimeSDR-Mini_GW
  LimeSDR-Mini board FPGA project
  ☆14Updated 6 years ago
• amungo / ItsFx3
  Software for Amungo's nut4nt board RF front-end IC with NTLab NT1065 four-channel multiband navigation
  ☆30Updated 3 years ago
• jmfriedt / active_radar
  UHF active noise radar
  ☆22Updated 4 years ago
• alexmrqt / gr-lazyviterbi
  GNURadio implementation of the lazy Viterbi algorithm
  ☆13Updated 5 years ago
• radiosd / PlutoSdr
  Access and cotrol of PlutoSDR hardware using python bindings to libiio
  ☆33Updated 5 years ago
• xil-se / SX1257-PMOD
  ☆15Updated 5 years ago
• Ttl / detector
  RF power detector board design files
  ☆18Updated 8 years ago
• reactancelabs / RADARduino
  Design files and code for the RADARduino radar shield.
  ☆21Updated 10 years ago