EmbeddedSam / MPU-6050Links
MPU-6050 Accelerometer and Gyroscope code
☆11Updated 11 years ago
Alternatives and similar repositories for MPU-6050
Users that are interested in MPU-6050 are comparing it to the libraries listed below
Sorting:
- SAMD21G18A Sensor Board☆15Updated 9 years ago
- An FPGA/STM32 based frequency counter with an Android user interface☆30Updated 9 years ago
- Andy's Workshop Reflow Oven Controller☆33Updated 8 years ago
- Home logging station☆12Updated 4 years ago
- TO247 half bridge module for EVs☆16Updated 7 years ago
- User-centered experiments with the Sipeed Tang Nano FPGA Board.☆13Updated 4 years ago
- ESTechnical Reflow Oven Controller source code and instructions☆47Updated 11 years ago
- Mechaduino derivative which drives up to 10A, drawn using KiCad☆30Updated 6 years ago
- Example projects for the 1BitSy development boards.☆37Updated 2 years ago
- ☆22Updated 8 years ago
- Tutorial/starter code for setting up GCC for PSOC5 (ARM) in an open-source baremetal configuration.☆33Updated 11 years ago
- GsD style kicad Libraries☆11Updated 5 years ago
- SWD Programmer for PSoc4 based devices☆32Updated 10 years ago
- The excellent Diolan bootloader modified to use standard (non-extended) instruction set and still fit in 1 kB bootblock☆10Updated 2 years ago
- NeoPixel Library that works with STM32duino. Tested with WS2812B.☆12Updated 9 years ago
- PCB files for the Adafruit FONA 800 GSM Cellular Breakout☆14Updated 4 years ago
- SquareWear is an open-source wearable electronics controller board. This repository contains the hardware design files, software library,…☆37Updated 9 years ago
- ☆19Updated 7 years ago
- Various board and libraries to fit the Automation Direct P1AM-PROTO enclosure.☆10Updated 5 years ago
- STM32 driver for WS2812 & WS2812B addressable RGB LEDs☆15Updated 11 years ago
- SunLeaf is a WiFi based remote sensor module, interfaces with I2C and UART sensors, pushes directly to the cloud.☆22Updated 9 years ago
- ☆14Updated 6 years ago
- Andy's Workshtop Graphics Coprocessor☆13Updated 10 years ago
- STM32F103C8, ST7735 based LCD, SD-card, ADC, USBCDC, MPU-9250, S-Bus, Servo control☆17Updated 8 years ago
- List of supported protocol decoder for ScanaStudio software☆12Updated 7 years ago
- PCB files for Adafruit INA169 Breakout☆12Updated 6 years ago
- Bootloader tool for OLS☆22Updated 9 years ago
- Arduino port for STM8S/STM8A 8-bit MCUs☆12Updated 8 years ago
- This is the code for our Arduino RFID Door Lock☆15Updated 11 years ago
- Hardware of Jasper's Electronic Load R2☆22Updated 7 years ago