jetsonhacks / jetsonGPIOLinks
A straightforward library to interface with the Jetson TK1 GPIO pins
☆21Updated 9 years ago
Alternatives and similar repositories for jetsonGPIO
Users that are interested in jetsonGPIO are comparing it to the libraries listed below
Sorting:
- PREEMPT_RT kernel for the Jetson TK1.☆17Updated 9 years ago
- A straightforward library to interface with the Jetson TX1 GPIO pins☆52Updated 7 years ago
- RTIMULib is a C++ and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems (especially the Raspberr…☆30Updated 5 years ago
- Install Robot Operating System (ROS) on NVIDIA Jetson TK1☆21Updated 5 years ago
- ☆80Updated 9 years ago
- Scripts and documentation on how to setup a ROS system on various platforms, such as Odroid and Intel Edison.☆17Updated 8 years ago
- BeagleBone ROS package that publishes the Invensense MPU-9150 data into a Topic.☆23Updated 5 years ago
- Adafruit 16 Channel Servo Driver for NVIDIA Jetson Development Kit☆26Updated 6 years ago
- An autopilot for Linux-based computers based on the BeagleBone (Black)☆109Updated 8 years ago
- Provides a ublox_gps node for uBlox GPS receivers and message and serialization packages for the binary UBX protocol.☆17Updated 8 years ago
- roslaunch for xv11 neato lidar for using hector mapping without odometery☆13Updated 8 years ago
- A small package to use the RTIMULib in ROS☆31Updated last year
- Integration of the Robot Operative System (ROS) and the BeagleBone.☆38Updated 11 years ago
- Build the 64-bit Jetson TX1 Kernel☆39Updated 2 years ago
- Install Grinch Kernel☆21Updated 10 years ago
- Simple C code for raspberry pi to read gyro, accelerometer, and temperature data from a mpu-6050 sensor.☆9Updated 11 years ago
- Operating system and flight stack agnostic driver framework for POSIX (Linux, NuttX, Mac OS, QNX, VxWorks).☆82Updated 5 years ago
- This repository isn't actively being worked on. If you would like to take over maintainership please open a ticket on https://github.com/…☆74Updated 7 years ago
- Arduino Library for interaction and learning about LIDAR-Lite v2 "Blue Label"☆67Updated 6 years ago
- Documentation on using the Snapdragon Flight platform.☆69Updated 7 years ago
- Hacking of the Neato XV-11 lidar☆84Updated 5 years ago
- A 3D printed raspberry pi ROS robot☆24Updated 9 years ago
- ☆13Updated 9 years ago
- ROS node for mipi camera module of Raspberry Pi☆23Updated last year
- This is the Arduino version of the code for my balancing robot/segway☆77Updated 12 years ago
- FLIR Lepton ROS node☆14Updated 10 years ago
- 9DOF Razor IMU available from SparkFun Electronics☆115Updated 5 years ago
- Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement☆41Updated 10 years ago
- APM Plane, APM Copter, APM Rover source☆36Updated 8 years ago
- Open AHRS Software/Hardware☆56Updated 7 years ago