cmcmurrough / odroid-developmentLinks
Code examples and support files for ODROID development
☆25Updated 9 years ago
Alternatives and similar repositories for odroid-development
Users that are interested in odroid-development are comparing it to the libraries listed below
Sorting:
- Face Detection and Tracking for ROS☆39Updated 2 years ago
- Scripts and documentation on how to setup a ROS system on various platforms, such as Odroid and Intel Edison.☆17Updated 9 years ago
- Groovy ROS node for camera module of Raspberry Pi☆77Updated 10 years ago
- Rinzler is an exceptionally skilled warrior and is the elite combatant in all games in the Grid.☆11Updated 13 years ago
- A small package to use the RTIMULib in ROS☆31Updated 2 years ago
- ☆80Updated 10 years ago
- Scanse Sweep ROS Driver and Node☆68Updated 4 years ago
- Rover car test platform with OpenCV, Raspberry Pi, PiCamera and ROS☆15Updated 9 years ago
- This is ROS package mentioned in the book "Learning Robotics using Python". This package contain drivers, Launch files for working with C…☆65Updated 7 years ago
- This is a slightly modified version of the official ardrone_autonomy package, which You can find here: https://github.com/AutonomyLab/ard…☆55Updated 9 years ago
- ROS node to acquire RGB and 3D data from SoftKinetic DepthSense cameras☆19Updated 10 years ago
- An autonomous, Arduino-based rover that creates maps of its surroundings using sonar sensors.☆44Updated 10 years ago
- Designing an Autonomous Exploration Architecture for an Indoor Quadcopter☆47Updated 11 years ago
- roslaunch for xv11 neato lidar for using hector mapping without odometery☆13Updated 8 years ago
- This repo is for the M.Eng project work of Gautham Ponnu and Jacob George. This is a project which will attempt to solve the SLAM problem…☆24Updated 9 years ago
- BeagleBone ROS package that publishes the Invensense MPU-9150 data into a Topic.☆23Updated 6 years ago
- Basic interface to two wheel differential mobile base and IMU using an Arduino(-like) mircocontroller to ROS.☆38Updated 10 years ago
- Sample code for setting and reading the MPU9250 IMU on the AUVIDEA J100 and J120 carrier board for the Jetson TX1☆13Updated 9 years ago
- ROS node for communicating with several models of commercially available IMUs over I2C in linux.☆53Updated 4 years ago
- A GUI for controlling the Crazyflie with ROS input/output☆88Updated 10 years ago
- Evolving codebase for a SLAM-capable robot using the RoboPeak LIDAR sensor☆50Updated 10 years ago
- Pronto is now built in ROS and developed at https://github.com/ori-drs/pronto_core☆84Updated 8 years ago
- THIS REPO HAS MOVED TO https://github.com/ros-planning/moveit☆12Updated 9 years ago
- ☆36Updated 4 years ago
- ☆25Updated 6 years ago
- ☆50Updated 9 years ago
- ROS package for robot localization and mapping based on range-only sensors☆10Updated 8 years ago
- A repository for tracking binary matrices in ROS.☆31Updated 8 years ago
- ☆77Updated 8 years ago
- A ROS driver and firmware to connect to Sparkfun OpenLog Artemis, 9DoF Razor IMU M0, 9DOF Razor IMU and 9DOF Sensor Stick. These boards c…☆93Updated 3 years ago