jetsonhacks / backupJetsonLinks
Backup a NVIDIA Jetson Developer Kit root system
☆28Updated 5 years ago
Alternatives and similar repositories for backupJetson
Users that are interested in backupJetson are comparing it to the libraries listed below
Sorting:
- RTIMULib is a C++ and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems (especially the Raspberr…☆32Updated 6 years ago
- PREEMPT_RT kernel for the Jetson TK1.☆17Updated 10 years ago
- ☆20Updated 6 years ago
- Real-Time Scheduling with NVIDIA Jetson TX2☆44Updated 8 years ago
- Integration of the Robot Operative System (ROS) and the BeagleBone.☆38Updated 12 years ago
- ROS2 on microcontrollers !☆25Updated 7 years ago
- Containerized ROS node that communicates with x4 lidar via USB pass though from the docker host☆17Updated 5 years ago
- GStreamer Inspector GUI☆42Updated 4 years ago
- OpenCV Spatial AI Competition 3rd prize winner project "Automatic Lawn Mower Navigation"☆50Updated 5 years ago
- A straightforward library to interface with the Jetson TX1 GPIO pins☆53Updated 8 years ago
- A Qt5 GUI to simplify the camera calibration process using OpenCV☆14Updated 3 years ago
- This is a ROS driver and firmware to connect to Razor IMU 9DOF (Degree of Freedom) board. This board consists of 3 sensor: magnetic, gyro…☆20Updated 12 years ago
- ☆15Updated 2 years ago
- ☆33Updated 6 years ago
- Library and examples to connect the FLIR Lepton3 thermal camera to Nvidia Jetson embedded boards☆57Updated 3 years ago
- Vision related packages developed within Team Hector/TU Darmstadt☆25Updated 8 months ago
- ROS node to acquire RGB and 3D data from SoftKinetic DepthSense cameras☆19Updated 10 years ago
- Node to combine IMU data (accelerometers and gyroscopes) with Compass data (magnetometers) for a cleaner reading of a Vehicles Heading☆39Updated 9 years ago
- raspberry pi c++ ROS mpu6050 IMU node☆23Updated 9 years ago
- Sample code for setting and reading the MPU9250 IMU on the AUVIDEA J100 and J120 carrier board for the Jetson TX1☆13Updated 9 years ago
- http://wiki.ros.org/opencv_apps☆72Updated 2 months ago
- ☆26Updated 3 years ago
- ☆83Updated last year
- Configuration scripts and install guides for NVIDIA Jetson platform☆96Updated 6 years ago
- *Under Development* - A fully-featured multirotor autopilot for ROS☆52Updated last year
- Build the 64-bit Jetson TX1 Kernel☆39Updated 3 years ago
- State-machine based interface to navigation capabilities☆21Updated 10 months ago
- Build the Linux Kernel and Modules on board the NVIDIA Jetson Nano Developer Kit☆99Updated last year
- Install LXDE on the NVIDIA Jetson Developer Kits☆20Updated last year
- Port from SVN. Required for PR2's webui☆12Updated 7 years ago