jxltom / gs_usbLinks
Python Windows/Linux CAN driver based on WCID for Geschwister Schneider USB/CAN devices and candleLight USB CAN interfaces
☆30Updated 8 months ago
Alternatives and similar repositories for gs_usb
Users that are interested in gs_usb are comparing it to the libraries listed below
Sorting:
- This is project SuperCAN. An open source USB to CAN-FD protocol.☆91Updated 5 months ago
- Firmware to support gs_usb on most STM32 devices☆53Updated 4 months ago
- Command-line tool to flashing devices by CAN-BUS☆90Updated 6 years ago
- Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!☆84Updated last year
- Firmware for the CANtact Pro☆49Updated 2 years ago
- USB to CAN adapter firmware☆138Updated this week
- Python wrapper for candle (gs_usb) adapters.☆10Updated 4 years ago
- Library for CAN-over-Serial-Line Interfaces (SLCAN Protocol)☆53Updated last year
- slCAN compatible firmware for STM32f103C8T6☆78Updated 3 years ago
- Open Source CANopen Stack☆62Updated 6 years ago
- gs_usb compatible firmware for candleLight, cantact and canable☆81Updated 4 years ago
- The bootloader used to flash our CAN-connected boards☆149Updated 2 years ago
- API for accessing classic CAN and ISO CAN FD controller☆49Updated 3 months ago
- ☆51Updated 6 years ago
- A CANopen protocol for all systems such as embedded, PC, etc.☆119Updated last month
- Firmware for SM-1301 USB-CAN FD adapter☆26Updated 3 weeks ago
- STM32 CAN-bus bootloader☆79Updated 9 years ago
- ☆67Updated 10 years ago
- An implementation of the ISO-TP (ISO15765-2) CAN protocol in C☆48Updated 2 months ago
- Zephyr RTOS board definitions for extra boards☆17Updated last year
- USB CAN-FD interface based on the STM32G0 that works well with gs_usb on Linux☆49Updated 2 years ago
- slcan firmware for the CVRA CAN to USB dongle☆37Updated 4 years ago
- ☆17Updated 10 years ago
- ☆14Updated 4 years ago
- FOC Motor Control Firmware☆94Updated last year
- This is an Open Source Hardware USB to CAN-FD Interface☆75Updated last month
- Hardware design files for the CANtact Pro☆76Updated 5 years ago
- Open Source USB to CANBUS interface☆108Updated last year
- a CanOpen Raspberry Pi Project that integrates several other projects☆33Updated 6 years ago
- Python tool for connecting to J-Link RTT Client☆49Updated 3 years ago