TsingWei / DJIRobomaster_C620_M3508_controller_ArduinoLinks
DJI大疆C620电调的Arduino版本的控制器
☆17Updated 5 years ago
Alternatives and similar repositories for DJIRobomaster_C620_M3508_controller_Arduino
Users that are interested in DJIRobomaster_C620_M3508_controller_Arduino are comparing it to the libraries listed below
Sorting:
- ROS2-Node for ODrive☆25Updated 2 years ago
- Second version design based on MG92B servomotors☆17Updated 4 years ago
- 本项目是国内唯一对标GhostRobotics Minitaur机器人的开源项目,力图为大家提供一个能实现真正力控的可靠、低成本、开放平台!!!☆23Updated 4 years ago
- 基于ROS的开源AGV底盘☆28Updated last year
- 四足机器人 固件集合☆50Updated 5 years ago
- 包含IMU设备读取和基于IMU融合算法的姿态估计包☆11Updated 4 years ago
- 使用robomaster官方C板基于CAN总线驱动电机(M3508、M2006、GM6020均可使用),程序使用CubeMX基于1.25.0版固件库生成。☆21Updated 3 years ago
- ROS2GO (ROS To Go) 是一个高速闪存U盘。ROS2GO (ROS To GO) is a ready-to-go high-speed USB flash drive☆20Updated 4 years ago
- Open loop walk engine for small humanoid robots☆39Updated last year
- 运动捕捉系统GLMocap包括多相机硬件开源方案和上位机软件算法方案的低成本运动捕捉系统。目前设计指标为低成本实现毫米级空间定位,辅助无人机等有室内定位需求的装置和设备。☆76Updated 2 years ago
- FishProtocol是一个方便的C++多协议(串口/UDP/TCP)通信库☆64Updated 2 years ago
- Motoman MA1400 simulation for Gazebo and ROS☆11Updated 6 years ago
- Tianbot Rosecho (Tianecho),中文语音人机交互模块,支持ROS即插即用☆35Updated 4 years ago
- ROS 移植到STM32F1平台的机器人底盘驱动程序☆29Updated 5 years ago
- DockerRos2UnityCar☆18Updated 2 weeks ago
- 基于STM32F103的智能机器人底盘工程代码,开发环境使用IAR☆18Updated 5 years ago
- T-Robot是一个DIY的移动机器人,底层采用Micro-ROS☆37Updated 2 years ago
- NexusK210开发板,基于K210+STM32F4,MaixPy和CubeIDE联合开发☆19Updated 2 years ago
- 一款基于STM32的SLAM机器人移动底盘☆15Updated 5 years ago
- Smarter Micro Servo (SMS) MOD☆22Updated 3 years ago
- 谷歌建图算法-windows版本☆15Updated 8 years ago
- stdr robot (turtlebot, etc) simulation with ROS, maze solving, navigation, multiple tasks.☆13Updated 7 years ago
- Motor controller firmware!☆41Updated 2 weeks ago
- ROS1 driver for the Robomaster S1 and Robomaster EP through the official SDK.☆25Updated 2 years ago
- 全开源8自由度四足机器人 欢迎Star☆58Updated 3 years ago
- HandsFree OpenRE Tutorial☆65Updated 2 years ago
- 机器人关节驱动☆30Updated 3 years ago
- 菠萝万能控制器,是一个由灯哥开源的,基于Apache开源协议和ESP32主控芯片的低成本四足机器人控制器,控制器集成了全部四足机器人的必须硬件,完美支持 Py-Apple Dynamics 系列开源四足控制软件☆68Updated 3 years ago
- 轮式移动机器人简单的分布式开发框架教程☆56Updated last year
- A Qt5 human-computer interaction software Based On ROS2☆21Updated last year