Alternatives and similar repositories for RMD_X8_PRO_CAN_BUS_CONTROLER

Users that are interested in RMD_X8_PRO_CAN_BUS_CONTROLER are comparing it to the libraries listed below

• pal-robotics / gazebo_ros_link_attacher
  Attach two Gazebo models with a virtual joint in a generalized grasp hack
  ☆123Updated last year
• lnotspotl / notspot_sim_py
  This repository contains all the code and files needed to simulate the notspot quadrupedal robot using Gazebo and ROS.
  ☆125Updated 4 years ago
• panagelak / Open_Mobile_Manipulator
  A cheap educational DIY mobile manipulator - ROS , with instructions on how to build it, starting code and demos
  ☆121Updated 4 years ago
• bandasaikrishna / ros_control_example
  Position and velocity control of a DC motor using ros_control package
  ☆59Updated 5 years ago
• ros-controls / roscon2022_workshop
  ☆156Updated 2 years ago
• NDHANA94 / hyperdog_ros2
  HyperDog is a quadruped robot which is fully based on ROS 2 and Micro-ROS
  ☆108Updated 9 months ago
• rokokoo / gazebo-conveyor
  ARIAC conveyor belt repurposed for generic conveyor belt usage
  ☆26Updated 4 years ago
• lnotspotl / notspot_sim_cpp
  This repository contains all the code and files needed to simulate the notspot quadrupedal robot using Gazebo and ROS.
  ☆50Updated 4 years ago
• PickNikRobotics / topic_based_ros2_control
  ros2_control hardware interface that uses topics to command the robot and publish its state
  ☆97Updated 2 months ago
• AntoBrandi / Arduino-Bot
  Arduinobot is an open-source 3D printed robot arm powered by ROS 2. Its simple design and low cost make it an excellent learning tool, fe…
  ☆53Updated 6 months ago
• bostoncleek / quadruped_control
  Quadruped control architecture
  ☆81Updated 3 years ago
• matthias-mayr / Cartesian-Impedance-Controller
  A C++ implementation of Cartesian impedance control for torque-controlled manipulators with ROS bindings.
  ☆265Updated last year
• chvmp / champ_teleop
  6DOF Teleoperation package to maneuver CHAMP
  ☆12Updated 2 years ago
• leggedrobotics / maxon_epos_ethercat_sdk
  Implementation of an ethercat device driver for the maxon epos 4
  ☆26Updated 8 months ago
• chvmp / champ_setup_assistant
  CHAMP Package Config Generator
  ☆89Updated 2 years ago
• moveit / mujoco_ros2_control
  ☆100Updated last week
• matheecs / ocs2_legged_robot_notes
  ☆180Updated 2 years ago
• lnotspotl / a1_sim_py
  This is a temporary repository, which contains all the files needed to simulate the Unitree Robotics' a1 quadrupedal robot.
  ☆69Updated last year
• MindSpaceInc / Spot-MuJoCo-ROS2
  Simulation environment with SpotMini model in MuJoCo based on ROS2
  ☆46Updated 2 years ago
• hucebot / opensot_docker
  Dockerfile to run OpenSoT and CartesI/O frameworks
  ☆14Updated 2 months ago
• bandasaikrishna / 6-DOF_Manipulator
  Pick and place using 6-dof arm. I am using move group pick and place pipeline to achieve this. The inverse kinematics solver used for th…
  ☆43Updated 4 years ago
• deborggraever / ros2-mecanum-bot
  ROS2 Mecanum wheel robot
  ☆116Updated last year
• chvmp / robots
  Collection of quadrupedal robots configured to work in CHAMP development framework
  ☆253Updated 10 months ago
• TopHillRobotics / quadruped-robot
  An Open Source Quadruped-Robot for Simulating and Real Environment
  ☆177Updated 2 years ago
• AndrejOrsula / panda_gz_moveit2
  Franka Emika Panda packages for manipulation with MoveIt 2 inside Gazebo
  ☆93Updated 2 weeks ago
• AndrejOrsula / gz_moveit2_examples
  C++ and Python examples of using MoveIt 2 inside Gazebo simulation environment
  ☆135Updated last year
• ShunyaoWang / quadruped_locomotion
  Develop a quadruped robot locomotion control system
  ☆28Updated 4 years ago
• UMich-BipedLab / cassie_description
  UDRF model of CASSIE robot
  ☆36Updated 6 years ago
• Kinovarobotics / ros2_kortex
  ROS2 driver for the Gen3 Kinova robot arm
  ☆78Updated last month
• leggedrobotics / elmo_ethercat_sdk
  ☆88Updated last year