Alternatives and similar repositories for Two-Axis-Camera-Tracking:

Users that are interested in Two-Axis-Camera-Tracking are comparing it to the libraries listed below

• vigasan / MotorizedCam
  Qt QML source code for Raspberry Motorized Cam project
  ☆18Updated 4 years ago
• scuttlerobot / SCUTTLE
  SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]
  ☆78Updated 11 months ago
• IS2511 / SCServo
  SCS/SMS servo library for Arduino [Not mine]
  ☆12Updated 3 years ago
• CGrassin / 3d_lidar
  This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.
  ☆71Updated last year
• Vidicon / camsense-X1
  unofficial reverse engineering of a Chinese LiDAR. Discussed this on my discord: https://discord.gg/zRGJcqa
  ☆56Updated 4 years ago
• PCrnjak / S-Drive-Firmware
  S_Drive is small bldc driver based on L6234 Three phase motor driver.
  ☆43Updated 11 months ago
• engineerm-jp / vacuum_robot_lidar
  ☆22Updated 11 months ago
• Jana-Marie / transpOtterNG
  Next Generation of TranspOtter.
  ☆37Updated 7 months ago
• jared-hughes / grbl-scara
  Modification of grbl that computes motor steps based on a SCARA coordinate system. Grbl is open source, embedded, high performance g-code…
  ☆18Updated 3 years ago
• isaac879 / Delta-Robot
  This repository is for my 3D printed delta robot controlled by an Arduino Nano.
  ☆45Updated 5 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 7 years ago
• ANM-P4F / ObjectTrackingCamera
  This sw control servo motors to make the android camera track the target object.
  ☆22Updated 4 years ago
• adafruit / Adafruit_CircuitPython_RPLIDAR
  CircuitPython library for using the Slamtec RPLIDAR
  ☆37Updated last month
• jumejume1 / stepper-encoder-close-loop-test
  ☆10Updated 2 years ago
• charmedlabs / pixy2
  ☆134Updated 7 months ago
• MAKER-ROS-TUTOR / AS5600_TEST
  ☆10Updated 2 years ago
• JoLamMaker / ThisArm_Firmware
  G-code enabled firmware for Robot Arms
  ☆32Updated 3 years ago
• Neumi / tmc2209_devboard
  An Arduino shield to test the TMC2209 stepper motion controller by Trinamic.
  ☆36Updated last year
• HasslerEngineering / 3D-Printed-Strain-Wave-Gear
  Files and Dokuments for the Strain Wave Gear (https://hackaday.io/project/120377)
  ☆9Updated 6 years ago
• Makerfabs / ESP32_IMU_Module
  ☆40Updated 3 years ago
• MarginallyClever / Delta-Robot
  Hobby scale for teaching basic robot concepts
  ☆37Updated 9 years ago
• KoshiroRobot / Simple-Smart-Servo-Driver
  ☆32Updated 2 months ago
• dlickindorf / moteus_canFD_serial
  A python script for controlling the moteus r4.3 using the canFD adapter
  ☆24Updated 3 years ago
• USU-Mars-Rover-Project / gps_control
  ☆9Updated 3 years ago
• rlew631 / ObjectTrackingDrone
  Drone w/ camera gimbal controlled by Pixhawk and Raspberry Pi running OpenCV
  ☆34Updated 4 years ago
• hoverboard-robotics / hoverboard-firmware-hack-FOC
  With Field Oriented Control (FOC)
  ☆46Updated 2 years ago
• tork-a / roomblock
  ☆48Updated 6 years ago
• 20sffactory / voicebot_opensource
  voice control programme to direct robot arm
  ☆19Updated 6 years ago
• NiklasHammerstone / GalvoStep
  Project for building a cheap galvo laser system using Stepper motors and widely available parts.
  ☆50Updated last year
• akshayvernekar / telloArduino
  Open source arudino library for controlling tello through ESP32
  ☆34Updated 4 years ago