nikisalli / nik-lidarLinks
a low cost 3d lidar based on ydlidar-x4
☆11Updated 4 years ago
Alternatives and similar repositories for nik-lidar
Users that are interested in nik-lidar are comparing it to the libraries listed below
Sorting:
- autonomous ROS2 lawn mower☆10Updated 3 years ago
- Differential Driving Robot with ESP32 and ODrive running micro-ROS☆13Updated 4 years ago
- 动手学ROS2硬件控制篇MicroROS学习板例程☆12Updated 2 years ago
- This project is my attempt to control a cheap sweeping robot with an added servo using an esp32-cam micro controller and ROS.☆19Updated 4 years ago
- Arduino library to support the VL53L7CX Time-of-Flight 8x8 multizone ranging sensor with 90 degrees FoV☆20Updated 6 months ago
- Stop the maintenance☆11Updated 3 years ago
- ROS1 package for LDRobotic LD06 Lidar☆39Updated 2 years ago
- A ROS node for communicating with the ICM20948 9DOF IMU.☆12Updated 4 years ago
- ☆10Updated 7 years ago
- Using YDLIDAR X2 with Google Cartographer ROS package☆17Updated 2 years ago
- This code can use Lidar's LD06 (LDS06) provided by LDROBOT from arduino.☆21Updated 3 years ago
- ladar MB 1R2T connection stm32f103 board☆12Updated 3 years ago
- A ROS2 Compatible node that interfaces with the BNO085 IMU sensor via python☆13Updated 3 months ago
- ☆10Updated 3 years ago
- Package to run 3D SLAM with two 2d Lidars, pixhawk imu and the Cartographer package☆12Updated 8 years ago
- A simple robot car based on RP Pico and MicroPython☆15Updated 6 months ago
- Diagnostics framework for micro-ROS☆10Updated 5 months ago
- ☆18Updated 4 years ago
- ydlidar ros2 package☆14Updated 2 years ago
- The message of WeAct-TX1_2-CB. A carrier board for NVIDIA Jetson TX1/TX2/TX2 4G☆14Updated 4 years ago
- ROS2-Node for ODrive☆25Updated 3 years ago
- [deprecated] ARM mbed based low-level firmware for ROSbot 2.0 for STM32F4 microcontroller☆10Updated 4 years ago
- LDROBOT DTOF LiDAR ROS Package☆31Updated 3 years ago
- A fork of linorobot2_hardware with support of esp32 on ROS2 Humble and other devices☆14Updated 2 years ago
- Qt implementation of I2C protocol for RaspberryPi along with some i2c sensors, in particular: TOF10120, VL53l1X, VL6180X, MPU6050, QMC588…☆13Updated 4 years ago
- ydlidar arduion driver☆20Updated 9 months ago
- Some sketches for the VL53L5CX ranging camera for use with the Arduino IDE☆22Updated 3 years ago
- A Self Balancing Robot with Stereo Camera setup based on ESP32 Platform.☆17Updated 4 years ago
- 3d printed wifi gripper , MoveIt2, micro-ROS , esp32☆12Updated 2 years ago
- My first project: a smart robot based on ROS with 2D lidar sensors and RGB-D camera☆12Updated 6 years ago