n1kn4x / xv11_lidar_pythonLinks
ROS2 driver in python for the prominent XV11 Lidar sensor firmware, which is common in chinese vacuum robots.
☆17Updated 2 years ago
Alternatives and similar repositories for xv11_lidar_python
Users that are interested in xv11_lidar_python are comparing it to the libraries listed below
Sorting:
- ☆24Updated 5 months ago
- Wheel odometry for differential drive robots☆15Updated 3 years ago
- A fork of the linorobot/linorobot2_hardware project which builds motor controller firmware for teensy, esp32 and pico to control mobile r…☆25Updated this week
- VESC Interface for ROS☆49Updated last week
- ROS2 driver for OAK cameras☆46Updated 2 years ago
- ROS1 package for LDRobotic LD06 Lidar☆39Updated 2 years ago
- ☆69Updated 8 months ago
- ROS 2 package for VL53L5CX and VL53L7CX ToF (8x8 Array) Imagers☆13Updated 9 months ago
- ☆53Updated last year
- ROS2 package for LDRobot lidar. Based on ROS2 Lifecycle nodes☆93Updated 6 months ago
- ☆13Updated last year
- This is a ROS 2 & Micro-ROS project to control an RC tank with differential drive (skid steering) with an ESP32-CAM module.☆73Updated 2 years ago
- 🔧 unofficial ROS 2 install/setup scripts for Ubuntu☆87Updated 2 months ago
- Awesome 2D LiDAR list - specs, protocols, wiring, code, identification photos/videos, performance evaluations☆94Updated 3 months ago
- A tool to easily Dockerize ROS2 workspaces and packages.☆19Updated 2 months ago
- Foxglove panel extension for working with joysticks☆58Updated last year
- LDROBOT DTOF LiDAR ROS2 Package☆62Updated last year
- The BlueOS ROS 2 Extension bridges ROS 2 with BlueOS, enabling streamlined control, sensor integration, and real-time data visualization …☆35Updated 2 months ago
- A ROS2 package that interfaces with an MPU6050 sensor over I2C.☆45Updated 2 years ago
- Simple balancing hoverboard robot☆51Updated 5 months ago
- ☆18Updated 3 years ago
- This is an example of a modern ROS2 development environment which utilises a devcontainer and integrated with VS Code debug, linting and …☆20Updated 2 years ago
- ☆18Updated last year
- 3d printed wifi gripper , MoveIt2, micro-ROS , esp32☆12Updated 2 years ago
- ☆79Updated 5 months ago
- Waveshare DDSM115 motor wheel driver for ROS☆21Updated last year
- reference implementation of mROS 2 for ESP32 boards☆52Updated 10 months ago
- ROS2 Controller for the Adafruit 16 channel PWM servo I²C board, hat and similar PCA9685 based boards, provides absolute proportional PWM…☆19Updated last week
- A lightweight interface for AMRs☆14Updated 3 years ago
- A ROS2 Humble fully configurable PID library based on Brett Beauregard Arduino PID library☆40Updated 2 years ago