Dotolie / libIDDLinks
9 axis sensor icm20948
☆9Updated 6 years ago
Alternatives and similar repositories for libIDD
Users that are interested in libIDD are comparing it to the libraries listed below
Sorting:
- A ICM20948 portable HAL library.☆9Updated 2 years ago
- Arduino library for the MPU-9250 enabling its digital motion process (DMP) features.☆12Updated 6 years ago
- Library for the Bosch BNO055 Sensor based on and used with the STM32-HAL.☆18Updated last year
- BLE IMU Peripheral using Invensense ICM20948☆11Updated 3 years ago
- ICM-20948 library which is based on the ICM-20648 library from Silicon Labs.☆13Updated 2 years ago
- A Tiny Library for ICM-20948 using Raspberry Pi Pico C/C++ SDK☆9Updated 2 years ago
- ☆10Updated 4 years ago
- Arduino library to support the VL53L7CX Time-of-Flight 8x8 multizone ranging sensor with 90 degrees FoV☆15Updated 2 months ago
- DPEng's Arduino library for the ICM-20948 breakout board with magnetometer calibration and AHRS examples☆28Updated 3 years ago
- 用STM32读取BNO085，并将状态数据通过CAN发送出去☆13Updated 5 years ago
- A demo showing the pose of the mpu6050 in 3D using esp-idf☆69Updated 3 months ago
- The ICM20948 is the next IMU in the lineup from Invensense, following the MPU-9250☆17Updated 4 years ago
- Inertial Sensor Development Kit☆13Updated 7 years ago
- VL53L0X (laser ranger) for ESP-IDF (e.g. ESp32)☆21Updated last year
- Communicate with 2.9" Waveshare ePaper Module using SPI interface of ESP32 and ESP-IDF or Arduino☆25Updated 7 years ago
- Linux driver for I2C communication with ICM20948.☆21Updated 4 months ago
- OpenOCD + ESP32 support for CLion☆17Updated 2 months ago
- Migrated from 3irobotics website. Original copy of Lidar driver.☆13Updated 5 years ago
- Библиотеки для получения данных с различных сенсоров / Libraries for receiving data from various sensors☆19Updated 3 weeks ago
- MPU9250 driver for the ESP8266 and the ESP32☆36Updated last year
- Балансирующий робот на nodemcu☆10Updated 3 years ago
- Invensense 20948 chip working with DMP code for Arduino environment☆42Updated 5 years ago
- Example of using MQTT library PubSubClient for ESP32☆12Updated 5 years ago
- An Arduino library for the ICM20948 9-axis accelerometer, gyroscope and magnetometer. It contains many example sketches with lots of comm…☆58Updated 2 months ago
- BNO080 STM32F4 SPI LL Driver Source Code(Modified Arduino driver originally created by Sparkfun)☆27Updated 4 years ago
- Demo code showing how to interface with BNO080 (or FSP200) using an STM32F411 Nucleo dev board.☆38Updated last year
- some animations for the lilygo esp32 s3 tft display☆9Updated 2 years ago
- ICM20948 ESP-IDF Driver☆9Updated 2 months ago
- Software I2C driver for ESP-IDF (ESP32)☆26Updated 5 years ago
- ICM-20948 library with STM32 HAL driver☆61Updated 2 years ago