Alternatives and similar repositories for ICM20948

Users that are interested in ICM20948 are comparing it to the libraries listed below

• GlideLeo / BNO080_RVC_Mode_STM32F401_Driver
  A BNO080_RVC_Mode(UART communication) driver running at STM32F401CCU6
  ☆12Updated 6 years ago
• stephendpmurphy / icm20948
  📡 C Driver for the ICM-20948 9-Axis Telemetry sensor
  ☆28Updated 4 years ago
• KitSprout / KSDK
  Inertial Sensor Development Kit
  ☆13Updated 7 years ago
• VisualGPS / VisualGPSqt
  A QT application (GUI) that makes use of the VisualGPS/NMEAParser project.
  ☆18Updated 5 years ago
• wuhanstudio / micro_ros
  MicroROS on RT-Thread (ROS2).
  ☆28Updated 3 years ago
• weizhideshenghuo / STM32F103_IIC_BNO085
  用STM32读取BNO085，并将状态数据通过CAN发送出去
  ☆15Updated 5 years ago
• 1847123212 / esp32_mpy
  Master control of robot using esp32 chip with openmv and tensorflow-lite support.
  ☆11Updated 2 years ago
• cy023 / ICM20948
  A ICM20948 portable HAL library.
  ☆11Updated 3 years ago
• A-R-Hariri / ICM20948_STM32Library
  SparkFun ICM20948 Library ported for STM32 MCUs with DMP
  ☆14Updated 3 years ago
• Lembed / ROS-Nuttx-STM32
  ros nodes on stm32 board with nuttx, a fork of ros2
  ☆23Updated 9 years ago
• micro-ROS / micro_ros_nuttx_app
  An standalone micro-ROS app for Nuttx
  ☆13Updated 3 months ago
• Zubax / canface_cf1
  High performance CAN-USB/CAN-UART adapter + UAVCAN devboard
  ☆37Updated 4 months ago
• HongshiTan / RTIMULib2
  9-dof, 10-dof and 11-dof IMU fusion library for Linux systems (development version)
  ☆92Updated 3 years ago
• fishros / example_micoros_board
  动手学ROS2硬件控制篇MicroROS学习板例程
  ☆12Updated 2 years ago
• Zubax / gridsens_gs2
  Zubax GNSS module
  ☆56Updated last year
• the-fenrir / Fuzzy-PID
  STM Code implementing Fuzzy Logic for PID to drive motor.
  ☆24Updated 6 years ago
• zjm1060 / stm32h7_flashloader
  QSPI flashloader(25q128)
  ☆20Updated 3 years ago
• SargisYonan / uKal
  Micro Kalman Filter for linear and nonlinear systems
  ☆42Updated 5 years ago
• Silvanosky / PositionEstimator
  Estimate position from an IMU ICM20948 over time on an ESP32 and state of the art calibration algorithms.
  ☆14Updated 5 years ago
• WeActStudio / cangaroo
  Open source can bus analyzer software - with support for CANable / CANable2 / USB2CANFDV1, CANFD, and other new features
  ☆21Updated last year
• tuupola / esp_software_i2c
  Software I2C driver for ESP-IDF (ESP32)
  ☆28Updated 6 years ago
• dr-duplo / eekf
  C-Implementation of an Extended Kalman Filter for use in embedded applications
  ☆97Updated 10 years ago
• majianjia / QingStation-Firmware
  C Firmware for QingStation
  ☆16Updated 3 years ago
• SoyM / TOF10120
  TOF10120 uart lib
  ☆10Updated 6 years ago
• VL-Systems / balansing_robot
  ☆12Updated 4 years ago
• KitSprout / IMUCube
  BLE, IMU and LED Development Kit，Use nRF51822 + MPU6500 + WS2812B
  ☆52Updated 9 years ago
• x893 / MotionDriver6
  InvenSense Motion Driver 6.0 beta
  ☆27Updated 8 years ago
• TKJElectronics / XV11Lidar_STM32F429
  Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement
  ☆42Updated 11 years ago
• kriswiner / MPU6050HMC5883AHRS
  9 DoF sensor fusion with AHRS output for MPU-6050 gyro/accel + HMC5883 magnetometer sensor
  ☆31Updated 4 years ago
• kylehendricks / esp32-vl53l0x
  A VL53L0X driver for the ESP32
  ☆20Updated 7 years ago