Alternatives and similar repositories for balansing_robot

Users that are interested in balansing_robot are comparing it to the libraries listed below

• TrashRobotics / BalancingRobot
  Балансирующий робот на nodemcu
  ☆10Updated 4 years ago
• zjor / balancing-robot
  A segway-like balancing robot project
  ☆23Updated last year
• MoonFox2006 / ESP32_MQTT
  Example of using MQTT library PubSubClient for ESP32
  ☆12Updated 5 years ago
• WeActStudio / WeActStudio.MiniSTM32H7B0
  STM32H7B0VBT6 Core Board 280Mhz,128KB ROM,1.4M SRAM
  ☆17Updated 2 years ago
• manfredipist / QI2CProtocol
  Qt implementation of I2C protocol for RaspberryPi along with some i2c sensors, in particular: TOF10120, VL53l1X, VL6180X, MPU6050, QMC588…
  ☆12Updated 4 years ago
• SolidGeek / Selfbalancing-Robot-ESP32
  ☆14Updated 5 years ago
• GlideLeo / BNO080_RVC_Mode_STM32F401_Driver
  A BNO080_RVC_Mode(UART communication) driver running at STM32F401CCU6
  ☆12Updated 5 years ago
• rupin / SparkFun_MPU-9250-DMP_Arduino_Library
  Arduino library for the MPU-9250 enabling its digital motion process (DMP) features.
  ☆12Updated 6 years ago
• cy023 / ICM20948
  A ICM20948 portable HAL library.
  ☆10Updated 3 years ago
• BerndCirotzki / ESP32_Precision-9_compass_BNO055
  ☆14Updated 7 months ago
• VB-Radchenko / DWIN-Project
  ☆17Updated 3 years ago
• WeActStudio / STM32duino-bootloader
  Bootloader for STM32F103 boards, for use with the Arduino_STM32 repo and the Arduino IDE
  ☆10Updated 2 months ago
• NotBlackMagic / Delta-2G-LiDAR-Driver
  ☆10Updated 3 years ago
• WeActStudio / WeActStudio.CH9143_BLE2USB2UART
  ☆22Updated 2 years ago
• well-techn / Aquila
  ☆22Updated last month
• balmerdx / RLCMeterH750
  Good RLC meter
  ☆21Updated 2 years ago
• stm32duino / VL53L7CX
  Arduino library to support the VL53L7CX Time-of-Flight 8x8 multizone ranging sensor with 90 degrees FoV
  ☆19Updated 5 months ago
• unwireddevices / umdk-boards
  ☆13Updated 6 years ago
• 1847123212 / esp32_mpy
  Master control of robot using esp32 chip with openmv and tensorflow-lite support.
  ☆11Updated 2 years ago
• sparkfun / SparkFun_Qwiic_9DoF_IMU_Breakout
  The ICM20948 is the next IMU in the lineup from Invensense, following the MPU-9250
  ☆17Updated 4 years ago
• kotyara12 / telemeter_dzen
  Термостат + охранно-пожарная сигнализация
  ☆14Updated last year
• WeActStudio / WeActStudio.STM32H5_64Pin_CoreBoard
  STM32H562RGT6 Core Board
  ☆21Updated 9 months ago
• WeActStudio / WeActStudio.USB2SerialV1
  A mini USB to serial port with DTR and RTS, 6Mbps maximum speed
  ☆21Updated 3 years ago
• WeActStudio / cangaroo
  Open source can bus analyzer software - with support for CANable / CANable2 / USB2CANFDV1, CANFD, and other new features
  ☆16Updated last year
• WeActStudio / WeActStudio.STM32G474CoreBoard
  ☆32Updated last year
• discover1977 / YWInformer
  Weather informer
  ☆12Updated 3 years ago
• JimInCA / ble-imu-invensense-icm20948
  BLE IMU Peripheral using Invensense ICM20948
  ☆11Updated 3 years ago
• WeActStudio / WeActStudio.CH32V003CoreBoard
  CH32V003F4U6 Core Board
  ☆29Updated last year
• MoonFox2006 / ESP32_QuickStart
  ESP32 Task/Queue demo Arduino application
  ☆11Updated 5 years ago
• WickedLukas / ICM20948
  ICM-20948 library which is based on the ICM-20648 library from Silicon Labs.
  ☆13Updated 2 years ago