uhi22 / ccs32
WT32-ETH01 with tpLink HomePlug modem as CCS charge controller
☆21Updated last year
Related projects ⓘ
Alternatives and complementary repositories for ccs32
- ESP32 talks via SPI with QCA7005 PLC modem☆19Updated last year
- STM32 with QCA7005 as CCS charge controller☆62Updated this week
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆64Updated 3 weeks ago
- ESP32 Based Chademo implementation☆14Updated 2 months ago
- Software for Damien Maguire's CHAdeMO controller☆19Updated 4 years ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆39Updated 3 years ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated 8 months ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆14Updated last year
- The devolo dLAN Green PHY module is ideal for installation in all IoT-devices. Includes QCA7000 chipset and LPC1758 host processor.☆0Updated last month
- Collection of CAN logs from different electric vehicles☆29Updated 2 months ago
- Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70…☆57Updated 2 weeks ago
- V2G (Vehicle-to-Grid) Wireshark LUA dissectors (ISO 15118-2)☆23Updated 3 years ago
- Firmware for IEC61851/J1772 Vehicle Charge Port (Vehicle Side) & EVSE (Supply Side)☆17Updated 2 years ago
- a ESP32-S3 talks to a QCA7005 to read the SOC of a car☆15Updated last year
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated 11 months ago
- Electric vehicle CCS charging investigations with Python☆154Updated 2 weeks ago
- Implementation of the Signal Level Attenuation Characterisation (SLAC) introduced in ISO15118-3☆41Updated last year
- The main files for the car charging station project☆29Updated 7 years ago
- Dissector for the V2G Protocols☆48Updated last month
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆58Updated 3 years ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- A collection of DBC files☆17Updated 9 months ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆14Updated last week
- A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.☆110Updated this week
- leaf spline revers engineering☆12Updated 4 years ago
- BelayBox reference hardware☆40Updated 2 months ago
- ☆10Updated last year
- ☆22Updated 9 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆53Updated 2 months ago
- An open source project implementing the basic functionality of the ISO IEC 15118 and also the DIN 70121 vehicle to grid (V2G) communicati…☆87Updated 2 years ago